Texas-1-lunger
Full Member
Offline
Iraq Vet
Posts: 203
|
Ok so since it has been outstanding weather for riding here in Texas i desided to do my chain mod that my bike needed. So on my test run today on my way to work im driving along loving life. When I pull on the off ramp and decel the bike rpms wind out WTF right ?
I pull over and think back of all the mods i've done and why they would be making the butterflies stick. SO i run wound out all the way to work and park it next to my CNC machine so I can look at it between parts cycles.
Took everything apart and found a screen fron the hi flow air filter kit I bought off Ebay jammed under the slide. took it out found some vent-a-hood screen and used that for a replacement which works very well BTW.
During the process I managed to ruin the soft garbage screws on the top of the carb so after grinding them off and tapping them out i put some nice american steel hex bolts in there from our tooling holders works great and fit like a glove they are 5/ 32 for those that wish to do this and sace the hassle of those POS screws.
Anyway when i drain the tank of gas it was into a can the apparently had diesel in it so i had almost run my battery down trying to start it so I could leave, had to open up the Gas mixture screw way rich but it works and I made it home no problem moral of the story no more cheap mods and you can run a savage on 70% gas and 30% diesel Trust me nah sayers I just did it this morning.
|