SuzukiSavage.com - dr650 engined savage!?

kempo Ex Member	dr650 engined savage!? 02/14/10 at 11:54:46 hey anyone thought about using a suzuki dr650 engine in the savage as they have more hp as standard! + probally a stronger engine!?
Back to top	IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10661 Oklahoma Gender:	Re: dr650 engined savage!? Reply #1 - 02/14/10 at 16:11:42 The thought has passed through my mind before ... it would be interesting .................................
Back to top	IP Logged

Phelonius Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1897	Re: dr650 engined savage!? Reply #2 - 02/14/10 at 16:16:32 I have thought about it but would really like a dr 650 engine with a Savage crankshaft in my Dr650. If it could be done it would give over 800cc. Phelonius
Back to top	Phelonius IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10661 Oklahoma Gender:	Re: dr650 engined savage!? Reply #3 - 02/14/10 at 17:43:38 Phelonius wrote on 02/14/10 at 16:16:32: I have thought about it but would really like a dr 650 engine with a Savage crankshaft in my Dr650. If it could be done it would give over 800cc. Phelonius Talk about fun ! ! !
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: dr650 engined savage!? Reply #4 - 02/15/10 at 01:12:10 That oughta make for quite a test for the starter.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10661 Oklahoma Gender:	Re: dr650 engined savage!? Reply #5 - 02/15/10 at 03:36:12 I just did a calc of using a Savage crank in the DR and with the larger 97mm piston, and the total is 694.64cc with a compression boost from the stock 9.7 to 10.5 How did you calc the 800cc setup ?
Back to top	IP Logged

Boule’tard Serious Thumper ModSquad Offline Master of the Obvious Posts: 1620 Austin TX Gender:	Re: dr650 engined savage!? Reply #6 - 02/15/10 at 07:11:44 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1261629800 As far as I know, it's been talked about but never attempted..
Back to top	That which can be destroyed by the truth should be. - P.C. Hodgell IP Logged

Phelonius

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 1897

Re: dr650 engined savage!?
Reply #7 - 02/15/10 at 10:49:55

LANCER wrote on 02/15/10 at 03:36:12:

I just did a calc of using a Savage crank in the DR and with the larger 97mm piston, and the total is 694.64cc with a compression boost from the stock 9.7 to 10.5

How did you calc the 800cc setup ?

The late model Dr650 engines are a very shot stroke with a 105mm piston. Spin that on a Savage crank and let your eyes bugg out at your calculator.

Phelonius

Back to top

Phelonius

IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10661 Oklahoma Gender:	Re: dr650 engined savage!? Reply #8 - 02/15/10 at 12:50:39 just did the 105 bore x 94 stroke = 814cc yep, that would be quite the bump every time it came around
Back to top	IP Logged

JohnBoy Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 825 Gender:	Re: dr650 engined savage!? Reply #9 - 02/15/10 at 16:33:50 If this would hold up, what would be the down side?
Back to top	IP Logged

BurnPgh Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1732	Re: dr650 engined savage!? Reply #10 - 02/15/10 at 16:52:17 If it held up...you'd have to wear a mouth gaurd or say adios to your teeth i would imagine.
Back to top	IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10661
Oklahoma
Gender: male

Re: dr650 engined savage!?
Reply #11 - 02/15/10 at 18:03:06

keep in mind that Suzuki does make the DR800 for the gang in Europe ...
does anyone know if Suzuki makes a big piston kit for the DR800 ? ?

DR800S Big specifications

Engine Type 4-stroke, 1-cylinder, air-cooled with SACS, SOHC
Piston displacement 779 cm3
Bore x stroke 105 mm x 90 mm
Compression ratio 9.5 : 1
SACS, 4 valves. Dual carb. 54 hp (40 kW)/ 6.600 rpm, 62 Nm (6,32
Carburettor MIKUNI BST33, twin
Starter system Electric
Transmission 5-speed constant mesh
Drive system Chain, 116 links
Overall length 2,230 mm (87.8 in.)
Overall width 865 mm (34.1 in.)
Overall height 1,325 mm (52.2 in.)
Wheelbase 1,520 mm (59.8 in.)
Ground clearance 230 mm (9.1 in.)
Seat height 890 mm (35.0 in.)
Dry mass 194 kg (427 lbs.)
Front suspension Telescopic, coil spring, air damped
Rear suspension Link type, coil spring, gas/oil damped, spring preload fully adjustable
Front brakes Disc
Rear brakes Disc
Front tyres 90/90-21 54S
Rear tyres 130/80-17 65S
Ignition type Digital CDI ignition
Fuel tank 24.0 L (6.3 gal.)
Body colours 33J: Pearl Novelty Black
Y98: Candy Forest Green

Suzuki's Idea ...

A riders idea ... OH YEA

The crankcase on this puppy looks to be fairly large; maybe a slightly larger flywheel ? ? ? Grin

Back to top

IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: dr650 engined savage!? Reply #12 - 02/15/10 at 18:43:50 Looks to me like they both knew what they wanted to do.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Truckinduc Senior Member Offline SuzukiSavage.com Rocks! Posts: 255	Re: dr650 engined savage!? Reply #13 - 02/15/10 at 19:05:00 Id love to stuff one in my savage, then i wouldnt need to turbo it. Aw who am i kidding id turbo the 800 single too.
Back to top	IP Logged

kempo Ex Member	Re: dr650 engined savage!? Reply #14 - 02/16/10 at 12:32:03 arh man, im itching to try it! when my engine blow's im going to have to! shuld be fairly simple! aye!
Back to top	IP Logged