SuzukiSavage.com - carb size

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › carb size

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

carb size (Read 179 times)

kempo Ex Member	carb size 02/10/10 at 12:59:34 hi could some one let me know what the standard carb size is on the savi. thinking of changing to round cable slide type or flat.
Back to top	IP Logged

BurnPgh

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 1732

Re: carb size
Reply #1 - 02/10/10 at 14:11:13

36 or 38mm roundslides are the generalluy accepted improvements. Look into Lancer's carb kits. You get all kinds of extra goodies with it including necessary custom throttle cable and intake flange, Dial-a-jet, UFO, extra jets, iridium spark plug, manual, carb tool etc etc.

ps - no offense intended but questions are for rubberside down. Tech section is for how-tos.

IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10661 Oklahoma Gender:	Re: carb size Reply #2 - 02/10/10 at 16:10:22 + If you are going to use a roundslide then do stay with the 36/38mm size. Air velocity in the carb bore slows too much otherwise. If your engine is totally stock and just running a HD muffler or similar, go for the 36mm carb. It will work better for the low-mid range.
Back to top	IP Logged

Yonuh Adisi FSO Serious Thumper Offline Savage Jedi (Knight) Posts: 3622 Pilot Valley NV, aka Tatooine Gender:	Re: carb size Reply #3 - 02/10/10 at 21:15:24 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1120506946
Back to top	Check out Flight of Destiny http://www.amazon.com/dp/B00H9130XC IP Logged

kempo Ex Member	Re: carb size Reply #4 - 02/16/10 at 12:37:16 yeah was thinking of going with the 36mm round slide carb. what size jets do ya think.?
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home