SuzukiSavage.com - Interchangable Suzuki parts with SAVAGES? HELP!!!!

Need Parts dude YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 3	Interchangable Suzuki parts with SAVAGES? HELP!!!! 01/19/10 at 12:50:35 I need to know what years of Suzuki are interchangeable with a 1986 SAVAGE 650ls, because I need some parts for my engine-clutch carb ect. and I don't want to buy expensive parts online.
Back to top	IP Logged

BurnPgh Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1732	Re: Interchangable Suzuki parts with SAVAGES? HELP Reply #1 - 01/19/10 at 12:51:58 clutch is different. Engine and carb are the same through all years except for the jets in the carb. What exactly are you looking for?
Back to top	IP Logged

Yonuh Adisi FSO Serious Thumper Offline Savage Jedi (Knight) Posts: 3622 Pilot Valley NV, aka Tatooine Gender:	Re: Interchangable Suzuki parts with SAVAGES? HELP Reply #2 - 01/19/10 at 12:55:23 Give us a list of the parts you actually need and I am sure we can let you know what will interchange.
Back to top	Check out Flight of Destiny http://www.amazon.com/dp/B00H9130XC IP Logged

Need Parts dude YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 3	Re: Interchangable Suzuki parts with SAVAGES? HELP Reply #3 - 01/19/10 at 12:58:58 I need the carb, the clutch assembly and all electrical. In othe words the engine is fine but has most of it's other parts removed.
Back to top	IP Logged

Yonuh Adisi FSO Serious Thumper Offline Savage Jedi (Knight) Posts: 3622 Pilot Valley NV, aka Tatooine Gender:	Re: Interchangable Suzuki parts with SAVAGES? HELP Reply #4 - 01/19/10 at 13:09:47 Carb is interchangeable through all the years (just jet sizes are different as stated above). Clutch I am not sure about, and I just sold a wiring harness to another member that would have more than likely worked for you.
Back to top	Check out Flight of Destiny http://www.amazon.com/dp/B00H9130XC IP Logged

BurnPgh

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 1732

Re: Interchangable Suzuki parts with SAVAGES? HELP
Reply #5 - 01/19/10 at 13:13:55

the carb you can get on ebay for pretty cheap. Or if you havent found one by spring time i'll sell you mine as im switching to a VM. The wiring harness (i assume you need the cdi box too) is going to be trickier unless someone here has one. You might find one on ebay but it's got to be for an 86-88 model. The cdi is probably going to be quite pricey but you may find one on ebay. The cdi also has to be for an 86-88 model. Do you have a starter motor? I dont know if all years are interchangeable for starters but if they are get a newer model one. I dont know about clutch basket interchangeability.

Back to top

IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28886
L.A. California
Gender: male

Re: Interchangable Suzuki parts with SAVAGES? HELP
Reply #6 - 01/19/10 at 14:22:24

carbs are interchangeable, but not exactly the same.
clutch is the same but the basket is not because primary gears are different.
Wiring for an 86 is different. Don't know if they are interchangeable with later years, but other then the controls and the kick stand switch, most other component connectors are the same.
CDI is different. Don't know if they are interchangeable with 87 or 88. not interchangeable with 95 on.

Dude where are you at? There might be locals that can help you out.

Back to top

Versey's Place
Tech Section Index

IP Logged

Need Parts dude YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 3	Re: Interchangable Suzuki parts with SAVAGES? HELP Reply #7 - 01/19/10 at 17:43:42 I live in central ohio.
Back to top	IP Logged

trublu

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 22
Geneva, IN.
Gender: male

Re: Interchangable Suzuki parts with SAVAGES? HELP
Reply #8 - 01/29/10 at 09:25:44

verslagen1 wrote on 01/19/10 at 14:22:24:

carbs are interchangeable, but not exactly the same.
clutch is the same but the basket is not because primary gears are different.
Wiring for an 86 is different. Don't know if they are interchangeable with later years, but other then the controls and the kick stand switch, most other component connectors are the same.
CDI is different. Don't know if they are interchangeable with 87 or 88. not interchangeable with 95 on.

Dude where are you at? There might be locals that can help you out.

Verslagen, do you know what problems running an 86 CDI (bike is an 86) on a say a 95 or later engine will cause??

And, It WILL need the later CDI to run right , or the 86 one?

Also ,if it needs the later model CDI, is it a straight swap out with no mods needed to the 86 wiring,etc?

THANKS in advance Cool

Back to top

"life throws ya curves, you learn to swerve"

IP Logged

WillC YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 5	Re: Interchangable Suzuki parts with SAVAGES? HELP Reply #9 - 03/07/10 at 15:22:16 does anyone know what sidebars you can use to replace the stock savage sidebars if you want to take the sissy bar off?
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28660 Tucson Az Gender:	Re: Interchangable Suzuki parts with SAVAGES? HELP Reply #10 - 03/07/10 at 15:31:56 WillC wrote on 03/07/10 at 15:22:16: does anyone know what sidebars you can use to replace the stock savage sidebars if you want to take the sissy bar off? The kind from a Savage without a sissybar... They will bolt up fine...
Back to top	Ludicrous Speed !... ... ... IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10665
Oklahoma
Gender: male

Re: Interchangable Suzuki parts with SAVAGES? HELP
Reply #11 - 03/07/10 at 17:34:16

Need Parts dude wrote on 01/19/10 at 12:58:58:

I need the carb, the clutch assembly and all electrical. In othe words the engine is fine but has most of it's other parts removed.

I have a complete carburetor; fully rebuilt by me.

It has been completely disassembled, checked, cleaned, jetted with #52.5 pilot, 152.5 main jet, the white spacer has been filed to 1/2 its stock size; the pilot screw assembly is new and set at 1.5 turns out for a good starting point for your fine tuning, and the slide has been messaged with secret carb fairy dust to make it more responsive; & a new float bowl gasket on its bottom as well.

It is ready to bolt on and go.

This is better than a new stock carburetor.

It is $100 + $10 for shp in the US = $110 total, and can be sent via paypal to "savage.s40@gmail.com"

If you choose not to take it then it will go on ebay for $175.

PM me if you are interested.

Back to top

IP Logged