prechermike
Serious Thumper Alliance Member
Offline
Kalashna Kitty, from Skat
Posts: 1190
Ponzer, NC
Gender:
|
How worn and torn is it?
I have a hand inpact driver that I used on the top carb screws, but they were not messed up. But I was well on my way to messing them.
I also read on here somewhere that someone used a "redneck impact" on something. It was a regular cordless drill with the clutch set low so that it clicked when you tried to turn the screw. I had a corroded screw in the light fixture in the shower, the head was beginning to booger up, the hand impact did not help. Bad angle, into a fixture, into tile etc, I was afraid to really smack the thing. I used the cordless drill on the lowest setting and really pushed hard. I had to up the setting a couple of times, but eventually the screw broke loose.
Just a couple of ideas. Of course if it is beyond that, an easy out or making another slot, but I think that screw is recessed, so that might be tough.
|
Back to top
|
2006, HD pipe, Tkat fork brace, elkhide handgrips, gel seat w/riser, silverblue, Ed L's forward controls, Wristwatch, biblethumper650@gmail.com
IP Logged
|