SuzukiSavage.com - Need Footpegs....

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 5

Need Footpegs....
09/27/09 at 19:44:06

Ok so the inevitable happened. I laid over my bike....in my driveway! I felt like such an idiot....good thing was that other than bending the left foot peg there was no damage to the bike....so now that a few weeks have gone by, the stupid foot peg broke. I'm looking to replace them now but the motorcycle shops here tell me there are no aftermarket pegs that will just mount right up....any ideas? I can't afford the 80 bucks they want for the one foot peg from the factory but could afford to replace both if i could find some cheap aftermarket parts....Please help.

Back to top

IP Logged

Dj12midnit Serious Thumper Alliance Member Offline If you'r here and I'm here isn't this our time? Posts: 1036 Lynden Wa. Gender:	Re: Need Footpegs.... Reply #1 - 09/27/09 at 20:22:52 You do not need the whole thing, just get the broken bits.
Back to top	http://www.suzukiownersclub.net 2006 Progressive 412-4236C, Big Crank, TKat F\B, ME880 Rear. IP Logged

TmackDaddy YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 5	Re: Need Footpegs.... Reply #2 - 09/27/09 at 20:34:19 the problem with that is that every piece except the rubber is broken, and the rubber is all torn up anyways....i have looked at the diagram and they are telling me that the only thing i don't have to replace is the rubber and the screw that holds it to the bracket....all the other pieces are broken beyond repair
Back to top	IP Logged

Dj12midnit Serious Thumper Alliance Member Offline If you'r here and I'm here isn't this our time? Posts: 1036 Lynden Wa. Gender:	Re: Need Footpegs.... Reply #3 - 09/27/09 at 20:52:13 Wow that is wild I slid the rear end around and slammed it down on its side at thirty five and did not do that much damage.
Back to top	http://www.suzukiownersclub.net 2006 Progressive 412-4236C, Big Crank, TKat F\B, ME880 Rear. IP Logged

TmackDaddy YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 5	Re: Need Footpegs.... Reply #4 - 09/27/09 at 21:15:37 yep, according to the picture, the guy at the shop told me i needed everything except the screw..that would be part 8...and the base...part 2...said we might be able to reuse the rubber, except that its warped from me riding it with the metal broken....am hoping to find something aftermarket though, i hate the way the stock parts look
Back to top	IP Logged

Oldnewguy Senior Member Offline thumpin' along! Posts: 369 Upstate NY Gender:	Re: Need Footpegs.... Reply #5 - 09/28/09 at 04:28:09 I am going to have passenger pegs available later this week. Don't know if they will work? Only cost is postage. Let me know.
Back to top	'96 with Voyager kit, White spacer mod, K&N air filter, HD muffler, solo seat/back rest, hard saddle bags and trunk. IP Logged

Oldnewguy Senior Member Offline thumpin' along! Posts: 369 Upstate NY Gender:	Re: Need Footpegs.... Reply #6 - 09/28/09 at 04:33:31 It looks like in fig. 31 that the top one may be the passenger peg and the bottom ones the left and right driver pegs. The left driver peg has less "stuff" attached to it. The right one has a bracket, etc.
Back to top	'96 with Voyager kit, White spacer mod, K&N air filter, HD muffler, solo seat/back rest, hard saddle bags and trunk. IP Logged

kel30734 Senior Member Offline Dragon Rider Posts: 486 Calhoun, GA Gender:	Re: Need Footpegs.... Reply #7 - 09/28/09 at 05:14:50 Get ya some HD Pull offs You will have to take a drill to make the hole bigger but they work I keep a pair set in my saddle bags..... love wearing them out in the twisties
Back to top	IP Logged

justin_o_guy2

Serious Thumper

Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.

Re: Need Footpegs....
Reply #8 - 09/28/09 at 06:58:55

If mine needed replaced, they wouldnt get stock replacements. I dont like these pegs, not the design or the feel. Just dragging them thru corners ruins them. Once the bottom is ground away, the end cap will tilt. The things bend too easy & need to fold easier. IN a corner its Fold or Grind, since the design compresses the rubber to fold, it means Grind,

Back to top

The people never give up their liberties but under some delusion.- Edmund Burke.

IP Logged

photojoe FSO

Serious Thumper
Alliance Member

Offline

I did warn you to
brace yourself

Posts: 1379
New Jersey
Gender: male

Re: Need Footpegs....
Reply #9 - 09/28/09 at 08:15:51

I bought a pair of chrome Highway Hawk o-ring rider pegs for $38.00 +ship from here: http://www.betterbikeparts.com/bbp-store/bmy_search.php?prevbrand=11&in_categ...
The pegs in the link are for years: Fitment: Suzuki Savage 650 (1986 to 2002) Part #: HH-733-310
They have the hook on the end the same as ours, but it doesn't show in the picture. A little longer than stock, and more comfortable. Mine are about 1 1/2 years old and are holding up well, scrapes and all.

Back to top

FSO

IP Logged

ero4444 Full Member Offline weekender Posts: 176	Re: Need Footpegs.... Reply #10 - 09/28/09 at 15:21:00 >> the design compresses the rubber to fold, it means Grind, hey thanks for pointing this out! I messed the rubber up and thought I would just replace it but you have made me see there are better pegs that will hold up longer. good tip
Back to top	c2001, 3800miles, 3rd owner, adjusted idle, raised seat, Tkat brace, Raptor petcock, cleaned carb, replaced some jets, Dyna muffler, Fiamm horns, Shinkos, future Ed L. forward controls, fork boots. IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Need Footpegs.... Reply #11 - 09/28/09 at 16:46:00 Glad I could help.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

UneSauvage

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 6

Re: Need Footpegs....
Reply #12 - 12/02/14 at 10:33:43

Does anyone know why these pegs would not fit 2004 Savage? Description says 86-02.

Thanks!!

photojoe FSO wrote on 09/28/09 at 08:15:51:

I bought a pair of chrome Highway Hawk o-ring rider pegs for $38.00 +ship from here: http://www.betterbikeparts.com/bbp-store/bmy_search.php?prevbrand=11&in_categ...
The pegs in the link are for years: Fitment: Suzuki Savage 650 (1986 to 2002) Part #: HH-733-310
They have the hook on the end the same as ours, but it doesn't show in the picture. A little longer than stock, and more comfortable. Mine are about 1 1/2 years old and are holding up well, scrapes and all.

Back to top

IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28886
L.A. California
Gender: male

Re: Need Footpegs....
Reply #13 - 12/02/14 at 11:52:14

You could easily confirm fitment of any particular item...

by looking up the part number of the last year (in this case '02)

BAR, FRONT FOOTREST RH 43530-24B02

and then for the year you have...

BAR, FRONT FOOTREST RH 43530-24B02

In this case they are identical, so there should be no problem.

Note: the complete assy wasn't available for purchase, so look up the interfacing part.

Back to top

Versey's Place
Tech Section Index

IP Logged

UneSauvage

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 6

Re: Need Footpegs....
Reply #14 - 12/02/14 at 14:33:57

Thanks Mr. V! Neat trick!

verslagen1 wrote on 12/02/14 at 11:52:14:

You could easily confirm fitment of any particular item...

by looking up the part number of the last year (in this case '02)

BAR, FRONT FOOTREST RH 43530-24B02

and then for the year you have...

BAR, FRONT FOOTREST RH 43530-24B02

In this case they are identical, so there should be no problem.

Note: the complete assy wasn't available for purchase, so look up the interfacing part.

Back to top

IP Logged