Hi all,
this is an oil filler plug with built-in level gauge.
It's off a 1960's Ducati, but Moto Guzzi and BMW items are 99% the same.
Just to say, there's a long tradition of oil dipsticks built into the filler cap.
OK, now the big question:
Is there any way we can adapt / fabricate something for the Savage, especially since the Savage's oil filler cap cannot be used due to its position (and the internal baffle, duh...)
I was actually considering opening the engine, knocking out that plastic windowy see-thru thingy, and soldering on some kind of "elbow-adapter" I could screw the oil cap into.
This would allow me to check the oil like a gentleman (without having to kneel down with my ear to the ground) and actually using the same hole to pour oil into.
So before it's
, it'll have to be
think think think