Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› turn signal project
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
turn signal project (Read 210 times)
WebsterMark
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 13113
Gender:
turn signal project
09/05/09 at 05:53:45
Gonna rain for the next two darn days here in St. Louis so I figured this would be a good time to do a project I’ve wanted to do on my ’07. I want to take off the stock turn signals, pivot the holder around the fork tubes 90 degrees and use the opening in the holder (now facing to the front) and install some small bulbs recessed inside as turn signals. Then I’ll find an amber lens cover to install. First question; how do I get the rubber cone off once I’ve removed the fake chrome turn signal housing?
Back to top
IP Logged
PTRider
Senior Member
Offline
Posts: 397
Re: turn signal project
Reply #1 -
09/05/09 at 06:52:32
Will they be bright enough so a driver that cares just a little bit can see you?
Back to top
IP Logged
WebsterMark
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 13113
Gender:
Re: turn signal project
Reply #2 -
09/05/09 at 06:54:37
not sure, might have to use led light.
Back to top
IP Logged
WebsterMark
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 13113
Gender:
Re: turn signal project
Reply #3 -
09/06/09 at 07:18:06
Again, can anyone help with this? Is there an easy way to get the rubber cone off that sits under the turn signal without cutting it?
Back to top
IP Logged
prechermike
Serious Thumper
Alliance Member
Offline
Kalashna Kitty, from
Skat
Posts: 1190
Ponzer, NC
Gender:
Re: turn signal project
Reply #4 -
09/06/09 at 09:31:13
If I understand your plans, the wires run through the rubber things. You will have to take the eires completely out, then it is just a matter of a screw or two. But that is off the top of my head.
Back to top
2006, HD pipe, Tkat fork brace, elkhide handgrips, gel seat w/riser, silverblue, Ed L's forward controls, Wristwatch, biblethumper650@gmail.com
IP Logged
SimonTuffGuy
Serious Thumper
Alliance Member
Offline
i like to thump...
;)
Posts: 1159
Central PA
Gender:
Re: turn signal project
Reply #5 -
09/07/09 at 06:51:56
I think it's held on by a little screw on the inside of the mount.
I'm looking at going with a set of these:
Back to top
Simon
Pimptiva.com
IP Logged
WebsterMark
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 13113
Gender:
Re: turn signal project
Reply #6 -
09/08/09 at 10:26:32
Those would be perfect. Let me know if you find them.
Back to top
IP Logged
SimonTuffGuy
Serious Thumper
Alliance Member
Offline
i like to thump...
;)
Posts: 1159
Central PA
Gender:
Re: turn signal project
Reply #7 -
09/08/09 at 11:34:04
The site is:
http://www.ledbikelights.net/products.htm
If you order, let him know that I (SimonTuffGuy) sent you. He's a member over on another forum that I'm on. I'm going to order the tail light/turn signal combo for my fender, those signals, and a license plate light from him shortly.
Back to top
Simon
Pimptiva.com
IP Logged
buttgoat1
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 1042
Re: turn signal project
Reply #8 -
09/09/09 at 09:57:30
I have been eyeing the LED lights myself, but I had already bought a pair of turn signals to replace my broken stockers. I cut a piece of aluminum angle and bolted it crossways above the license plate. Not the prettiest job in the world, but it worked. just need some extra $ to get the LEDS.
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/22/24 at 15:24:31
›
General Category
›
Rubber Side Down!
› turn signal project
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.