SuzukiSavage.com - wiring the ignition timer

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › wiring the ignition timer

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

wiring the ignition timer (Read 86 times)

Bobbert Serious Thumper Offline CHOP IT Posts: 836 Los Angeles, CA Gender:	wiring the ignition timer 08/21/09 at 15:33:00 The wires from the left crank case cover broke due to fatigue. I've got to solder the wires back together, however the two wires coming from the ignition timer have lost all sign of color. Can someone take a look at theirs and see where the wires go? Thanks, I really appreciate the help!
Back to top	In progress- 1996 Savage: solo seat, pod filter, open exhaust, and custom bars, fender, wiring, paint. IP Logged

thumperclone Serious Thumper Alliance Member Offline PGR rider riding with respect Posts: 6044 Grand Junction Colorado Gender:	Re: wiring the ignition timer Reply #1 - 08/22/09 at 07:04:01 if ypu mean the ignitor there are 6 wires shown in the ssm from lefty to right: O/W B/Y B B/W G O hope this helps sorry read your post wrong 2 wires from the L engine case: neutral switch one is ground other (Bl) goes to side stand diode
Back to top	standing for those who stood for US IP Logged

Bobbert

Serious Thumper

Offline

CHOP IT

Posts: 836
Los Angeles, CA
Gender: male

Re: wiring the ignition timer
Reply #2 - 08/23/09 at 01:06:12

Im talking about the LEFT cover, the generator cover, that has five wires going through a rubber boot.

the generator coil has three wires (yellow) that go to the rectifier.

the ignition timer (inside the cover, its a little black unit) has two wires (green, orange) that go into the Ignition control box. this is the unit that measures crankshaft speed and times the spark

all 5 wires broke. I can figure out the generator coils easily because they're all the same, but the ignition timer/hall sensor probably has to wired in the right direction.

In progress- 1996 Savage: solo seat, pod filter, open exhaust, and custom bars, fender, wiring, paint.

IP Logged

thumperclone Serious Thumper Alliance Member Offline PGR rider riding with respect Posts: 6044 Grand Junction Colorado Gender:	Re: wiring the ignition timer Reply #3 - 08/23/09 at 05:09:04 thats the pick up coil on the magneto( mag has the 3 Y) G and O are tied to the ignitor,G in the 4th spot O in the 5th..coil shouldnt matter which is which,the way the diagram is drawn with the 3 Y on top the pick up coil is on the left side , O on the top of the coil and G on the bottom Good Luck!
Back to top	standing for those who stood for US IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home