Savage_Amusement
Serious Thumper
Offline
On this steel horse I ride.
Posts: 1004
Omaha, NE
Gender:
|
I'm having a hard time with these freaking turn signals. The biggest problem I am having is getting them to flash. I have both LED lights in the front and rear, LED again LED FLASHER that is meant for LED's. With this set up they are VERY dim on the front, and flash fine on the rear.
When I use the stock it will not flash at all, which is fine and I know why. If I add a TINY light bulb that came out of the stock speedo, it will flash quickly but fine and everything is bright.
I have also put a resistor in between the flash wire and the ground wire and got them to flash, but it gets kinda hot.
Here is the thing that gets me, if I remove the headlight wiring from the circuit everything works fine with the LED flasher installed.
Also if I run the lights in any configuration and hold down the high beams the running lights in the front DIM bad.
I don't know if this makes any sense what so ever to any one. I hope some one can think of something though. Everything worked before just fine with rears being LED and the fronts were stock. I don't know why it should be so totally different now.
Thanks.
|