justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
Call a salvage yard. You'll still have to have cut wires & use some heat shrink, to build the jumper. You do know that in order to make a slick connection, wires arent laid together, then the ends twisted, but held in a straight line, the stripped ends crossed at the 2/3rds of the way point, then wrapped around each other.The long part of the stripped area, the 2/3rds, wrapped around the 1/3rd length of the other wire. Then the wire is straight, no 1/2" long "spur" poking out, & soldered up, heat shrink on it & if its a 2 wire setup, a fatter piece of heat shrink that will have both wires in it, 1 piece of skinny wrap to insulate the wires from each other & a bigger one to hold the other wire close & insulate from everything else. 3 wires? 2 pieces of skinny wrap & 1 to wrap the group.
|