Call a salvage yard. You'll still have to have cut wires & use some heat shrink, to build the jumper. You do know that in order to make a slick connection, wires arent laid together, then the ends twisted, but held in a straight line, the stripped ends crossed at the 2/3rds of the way point, then wrapped around each other.The long part of the stripped area, the 2/3rds, wrapped around the 1/3rd length of the other wire. Then the wire is straight, no 1/2" long "spur" poking out, & soldered up, heat shrink on it & if its a 2 wire setup, a fatter piece of heat shrink that will have both wires in it, 1 piece of skinny wrap to insulate the wires from each other & a bigger one to hold the other wire close & insulate from everything else. 3 wires? 2 pieces of skinny wrap & 1 to wrap the group.

i have a extra harness from my 96, message me if you cant find what ya need...

V,

I've heard that Electrical Connection is real helpful if you call them concerning connectors.

I've done some other business with them and they are top notch.