Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› backfiring.....what can I do?
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
backfiring.....what can I do? (Read 214 times)
jsw1159
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 14
backfiring.....what can I do?
07/23/09 at 19:01:36
Ok.... I have an "07" I swaped out stock muffler for a HD off sporster, I changed the white spacer with half the size, I also changed main to a 150 from stock 145, did nothing with pilot turn mixture screw out 1-1/2 to 2 turns out. My problem I'm still having and hope someone can help is I am still having alot of popping between shifting, and decel. Where should I go from here? Oh and I double checked no exhaust leaks....that I can detect.
Back to top
IP Logged
DrunkenDwarf
Senior Member
Offline
Morning Zombie
Posts: 325
Seattle, WA
Gender:
Re: backfiring.....what can I do?
Reply #1 -
07/23/09 at 19:57:37
That's about where I am currently.
Does it backfire on shutdown? Make idle richer. (more turns out on screw or bigger pilot jet)
Does it backfire on throttle close? Make mid richer. (less spacer or bigger main jet)
Not professional advice, but that's what I've noticed.
-D. Dwarf
Back to top
Pearl White 2007 S40; Dyna exhaust; Current jets: 52.5 w/ bleed (2 turns out) / 1.5mm (0.06") spacer / 150; raptor petcock
IP Logged
Boule’tard
Serious Thumper
ModSquad
Offline
Master of the
Obvious
Posts: 1620
Austin TX
Gender:
Re: backfiring.....what can I do?
Reply #2 -
07/23/09 at 20:33:23
You'd be surprised how much effect the fuel screw still has out to 3.5 turns. That's where I set mine (just to get it to shut up and quit scaring grannies, as much as I enjoy that) until I discovered a tiny exhaust leak. Once the leak was fixed, 2.5 turns was sufficient to silence the backfiring.
Back to top
That which can be destroyed by the truth should be. - P.C. Hodgell
IP Logged
Rocco
Serious Thumper
Offline
addicted 2 riding
TcB
Posts: 1049
south florida
Gender:
Re: backfiring.....what can I do?
Reply #3 -
07/23/09 at 23:21:58
i honestly just turned my screw a little to the right to get a little more pow....i need help mentally i think lol
Back to top
'95 bobber rat...i guess it's a "bat bike" haha flat black mostly, bare metal tank, header wrap, always a work in progress !
IP Logged
odvelasc
Ex Member
Re: backfiring.....what can I do?
Reply #4 -
07/24/09 at 04:55:32
Boule’tard wrote
on 07/23/09 at 20:33:23:
You'd be surprised how much effect the fuel screw still has out to 3.5 turns. That's where I set mine (just to get it to shut up and quit scaring grannies, as much as I enjoy that) until I discovered a tiny exhaust leak. Once the leak was fixed, 2.5 turns was sufficient to silence the backfiring.
You are gonna lose the screw at 3.5 turns out man. The bike vibrate a lot in case you have not notices
. You should go no more than 2.5 before changing jets to a higher one. JW, you must have a leak. Run your bike for a few km and then check your muffler. If it has started to blue then you have a leak. Bluejob should clean it, but you will have to re-seal that muff at the header. My understanding though is that stock in the U.S is 150 and most people go up to a 152.5. Mine was a 145 stock (dyno jet sizes) and went up to a 146. Only got some popping when it was not warmed up enough on colder days. I had air mixture out about 2.0 turn max.
Back to top
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: backfiring.....what can I do?
Reply #5 -
07/24/09 at 05:21:16
I would think that spring tension could be increased to keep the screw from backing out by adding a small spring. Maybe one from a ball point pen.
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
Moofed
Full Member
Alliance Member
Offline
...and the engine
just gleams...
Posts: 148
Bloomington, Indiana
Gender:
Re: backfiring.....what can I do?
Reply #6 -
07/24/09 at 06:42:13
The microfiche says it already has a spring behind the mixture screw. Just from looking at the diagram it seems you could file a bit off the tip of the screw if you really needed that extra turn of adjustment to the rich side.
Back to top
IP Logged
BurnPgh
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 1732
Re: backfiring.....what can I do?
Reply #7 -
07/27/09 at 22:27:48
Had my idle mix at 3-3.5 turns for over a year and it never budged. I dont advocate it necessarily but I didnt have any issue. You'd also be surprised how little changes and weather can effect the carb. Depending on conditions I get anywhere from a loud sharp bang to a mouse fart or no backfire at all. Funny thing is rainy and cold (lean/lean)is not too loud a bang, but warm and dry(rich/rich) is just straight loud. Rainy and warm(lean/rich), and dry and cold (rich/lean)I usually get little or nothing. Seems being a bit rich and a bit lean both cause the backfire. At least on my machine. Or I have an exhaust leak. Havent checked. 145 is stock for US Savages. Except Cali I think. Theirs is ridiculously small IIRC. 135 or something.
Back to top
IP Logged
Moofed
Full Member
Alliance Member
Offline
...and the engine
just gleams...
Posts: 148
Bloomington, Indiana
Gender:
Re: backfiring.....what can I do?
Reply #8 -
07/30/09 at 17:05:35
My idle screw get gummed up I think. It wouldn't turn easily and eventually the slot was destroyed. Maybe if they are super clean they can backout on you when past 3 turns.
I got a replacement, but haven't tried to put it in yet. I don't think I've seen a picture of one on here before, so I'm going to fix that now:
That's an odd looking screw.
Back to top
IP Logged
Serowbot
YaBB Moderator
ModSquad
Offline
OK.... so what's the
speed of dark?
Posts: 28657
Tucson Az
Gender:
Re: backfiring.....what can I do?
Reply #9 -
07/30/09 at 17:15:30
Wow!,.. that's a big one!....
Back to top
Ludicrous Speed !... ...
...
IP Logged
Serowbot
YaBB Moderator
ModSquad
Offline
OK.... so what's the
speed of dark?
Posts: 28657
Tucson Az
Gender:
Re: backfiring.....what can I do?
Reply #10 -
07/30/09 at 17:16:34
jsw,.... Try raising your idle speed a hair...
Back to top
Ludicrous Speed !... ...
...
IP Logged
Bear
Junior Member
Offline
Electrical Engineer
- Retired - Ridin'
for 43 yrs
Posts: 71
Central Washington State
Gender:
Re: backfiring.....what can I do?
Reply #11 -
07/31/09 at 11:24:03
I am using a Harley Dyna muffler and have gone up one jet size in main and (non bleed) pilot. Did not touch idle screw. Using about 1/3 white washer. Runs great, no backfire. One additional thing that may have made a backfire difference. I drilled a 3/16 hole through the center of the muffler baffle. Didn't change sound too much and I think it vents out the gas that makes the BANG. Whatever, mine runs great with no backfire. I made a drill guide out of plastic pipe, so the bit would hit close to the center of the baffle. A bigger hole would just be noisy. This now is just right mellow rumble.
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/27/24 at 00:35:57
›
General Category
›
Rubber Side Down!
› backfiring.....what can I do?
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.