SuzukiSavage.com - Handle Bars 7/8" or 1"

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Handle Bars 7/8" or 1"

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Handle Bars 7/8" or 1" (Read 222 times)

DirtySavage YaBB Newbies Offline Wow, wow.. Pow, pow! Posts: 46 Gender:	Handle Bars 7/8" or 1" 07/22/09 at 10:55:47 What is the diameter of the stock bars? Will 7/8" bars fit in the stock risers? Please advise. Trent
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28850 Tucson Az Gender:	Re: Handle Bars 7/8" or 1" Reply #1 - 07/22/09 at 10:57:16 1"...
Back to top	Ludicrous Speed !... ... ... IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28850 Tucson Az Gender:	Re: Handle Bars 7/8" or 1" Reply #2 - 07/22/09 at 10:59:08 My shortest post ever!... Shoot!,... I blew it,.... I added this one...
Back to top	Ludicrous Speed !... ... ... IP Logged

DirtySavage YaBB Newbies Offline Wow, wow.. Pow, pow! Posts: 46 Gender:	Re: Handle Bars 7/8" or 1" Reply #3 - 07/22/09 at 11:03:08 LOL.... Will the risers work with a 7/8" bar?
Back to top	IP Logged

Yonuh Adisi FSO Serious Thumper Offline Savage Jedi (Knight) Posts: 3622 Pilot Valley NV, aka Tatooine Gender:	Re: Handle Bars 7/8" or 1" Reply #4 - 07/22/09 at 11:12:12 No.
Back to top	Check out Flight of Destiny http://www.amazon.com/dp/B00H9130XC IP Logged

DirtySavage YaBB Newbies Offline Wow, wow.. Pow, pow! Posts: 46 Gender:	Re: Handle Bars 7/8" or 1" Reply #5 - 07/22/09 at 11:17:16 That post is much shorter. Thanks
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28850 Tucson Az Gender:	Re: Handle Bars 7/8" or 1" Reply #6 - 07/22/09 at 11:23:11 Dang'it!,... Yonuh...
Back to top	Ludicrous Speed !... ... ... IP Logged

Yonuh Adisi FSO Serious Thumper Offline Savage Jedi (Knight) Posts: 3622 Pilot Valley NV, aka Tatooine Gender:	Re: Handle Bars 7/8" or 1" Reply #7 - 07/22/09 at 11:27:56
Back to top	Check out Flight of Destiny http://www.amazon.com/dp/B00H9130XC IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28850 Tucson Az Gender:	Re: Handle Bars 7/8" or 1" Reply #8 - 07/22/09 at 11:35:03 Oh,... You're good!.....
Back to top	Ludicrous Speed !... ... ... IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28850 Tucson Az Gender:	Re: Handle Bars 7/8" or 1" Reply #9 - 07/22/09 at 11:37:15 .
Back to top	Ludicrous Speed !... ... ... IP Logged

Yonuh Adisi FSO Serious Thumper Offline Savage Jedi (Knight) Posts: 3622 Pilot Valley NV, aka Tatooine Gender:	Re: Handle Bars 7/8" or 1" Reply #10 - 07/22/09 at 11:56:15 You win.
Back to top	Check out Flight of Destiny http://www.amazon.com/dp/B00H9130XC IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28850 Tucson Az Gender:	Re: Handle Bars 7/8" or 1" Reply #11 - 07/22/09 at 12:31:10 Yeah!!!.... I thought for sure you'd post a blank page....
Back to top	Ludicrous Speed !... ... ... IP Logged

Skid Mark Serious Thumper Offline FSO Posts: 1216 Calgary, Alberta Gender:	Re: Handle Bars 7/8" or 1" Reply #12 - 07/22/09 at 13:36:47 A little free time is a dangerous thing. I cn't beleive I read all the posts in this thread. Good thing they were short and to the point.
Back to top	2008 S40 , Windshield, Sigma Cycle Computer, after market backrest & luggage rack, Tkat Fork Brace, saddlebags, 12v power supply, Garmin GPS '09 C50SE, '09 C90 Shoulda got into this years ago IP Logged

T Mack 1 - FSO

Serious Thumper
Alliance Member

Offline

sold 2001 LS650 for
a 1986 XLH1100

Posts: 2919
Emmaus,Pa
Gender: male

Re: Handle Bars 7/8" or 1"
Reply #13 - 07/23/09 at 05:14:26

7/8" bars can be made to work on 1" risers. You will have to get or make up shims to account for the diameter difference. They have to be real good because there is alot of "push" on the bars every time you stop.

You will also have to do the same for all the things that mount on the bars..... so it's really not cost effective to use 7/8" bars.

Note: you can not put larger diameter bars on smaller risers.

Engineers design things, Technicians make them work.
---
30% of being mechanical is confidence/30% is knowing to go slow when needed/30% is looking repeatedly at what you have/10% is dumb luck Wink

IP Logged

DirtySavage YaBB Newbies Offline Wow, wow.. Pow, pow! Posts: 46 Gender:	Re: Handle Bars 7/8" or 1" Reply #14 - 07/23/09 at 07:16:09 I considered that..... I will see how close the bars I ordered are to fitting. Also, how they look will play a significant factor as to whether or not I modify the risers. I ordered a second bar that is 1" just in case. I think lower and wider bars will really make the bike feel good and look much better.
Back to top	IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home