justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
Theres about Nothing on these things you cant do yourself, one of the big +'s of having this bike. I think its an 8mm to pull the belt/pulley cover. Pop that off & have a look. If it Looks solid, mark the shaft & pulley with a scribe, put it in 1st gear, pull the clutch in & roll it forward & let the clutch out. Look at the marks. Now, roll it backwards & do the same thing. If the line on the shaft moves relative to the line on the pulley, its not tight enough. Also, if you see any sign of metal powder/shavings on the pulley or on the engine case below the pulley, thats pretty much a dead give away. Even if it passes the Gear/Clutch/Roll test, if there is metal from the pulley/shaft laying there, its not torqued right.
|