ok this might sound stupid but i was tring to remove the air box i took the battery box out and all that and removed the two screws on the sides but it still wont come out did i miss something? i feel really stupid i cant get it to come out

Ok thanks ill take a look tomorrow morning i feel really stupid ive been a mechanic for 10Years and a darn air box gets the best of me....

verslagen1 wrote on 07/10/09 at 19:05:13:


And yet again, I am saved by this great forum!

For the next poor slob, here is a pic of that huckleberry:





This pic is taken from the port side of the rear axle.  The chrome belt guard is to the left of the bolt, the upper run of the drive belt itself is above the bolt, the forward end of the rear fender is to the right of the bolt, and the inboard portion of the port passenger footpeg assy is visible at the bottom left of the photo (in the foreground and a bit out of focus).

Here is another look at the subject bolt (FYI, this is a slightly modded pic that is found on the Savage photo CD):




IHTH someone!

I'm doing this too.  Can anyone throw me a recommendation for a breather hose filter they like?

The ones they have are so generic.  I was thinking something with a little flair.  I saw a nice chrome billet one on ebay but it's 1/4" and I think 3/8-1/2" is more suitable.  That's why I was asking for recommendations.  I'm betting someone has something or has seen something nice looking.