Targett3997 wrote on 06/09/09 at 05:47:15:Thanks for the response.
If I understand right the stock pilot jet is 52.5. I am not sure exactly how to drill it out, but I am still looking on the forum.
Correct, stock is 52.5. Don't drill out the pilot jet to make it bigger. Buy a larger pilot jet.
Targett3997 wrote on 06/09/09 at 05:47:15:Stock the pilot screw is 3 turns out, but needs to be turned out another 1.5.(this one I get.)
Not another 1.5 turns out. Larger pilot jet and only 1.5 turns out total.
Targett3997 wrote on 06/09/09 at 05:47:15:Also, I keep reading about washers and spacer. I know that it is the spacer on the end of the needle, but what kind of washers and spacers is everyone replacing them with?
Search for white spacer. The spacer is used to set the needle height, in relation to the main jet, in a certain position at the factory. Thinning the spacer or replacing it with washers to achieve thinning changes the needle position and improves midrange.