Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
can change pilot and main jet without moving carb? (Read 112 times)
tomtaz1975
YaBB Newbies
*
Offline

Let's Ride!

Posts: 34
Milwaukee, WI
Gender: male
can change pilot and main jet without moving carb?
06/04/09 at 16:41:13
 
Do you have to remove the assembly, or can you change these from underneath just by removing the bowl?

It looks like there is enough room...but I don't know if you'll be able to see what you are doing or not.  Waiting to get my main jet tool and so I'm just curious.
Back to top
 
 

2001, Yellow, Dunstall Megaphone Long, 155 Main, 55 Pilot, no spacer, K&N Filter.
  IP Logged
srinath
Serious Thumper
*****
Offline

I love YaBB 1G -
SP1!

Posts: 5349

Re: can change pilot and main jet without moving c
Reply #1 - 06/04/09 at 17:30:42
 
Yes you can ... but not if the phippips screws are stuck ...

I usually replace the phillips screws on the bowl with stainless allen head bolts, and you can yank em anytime and clean and swap jets ... unless the jets are stuck in there ...

Cool.
Srinath.
Back to top
 
 
  IP Logged
seviersavage
Senior Member
****
Offline

SuzukiSavage.com
Rocks!

Posts: 364
Smoky Mountains Tennessee
Gender: male
Re: can change pilot and main jet without moving c
Reply #2 - 06/04/09 at 18:11:31
 
With my vm carb I can loosen the clamps that hold carb in boots and spin it around to gain access to the jets easy. If you disconect the throttle cable maybe you can spin it in place, make it easier if you can.
Seviersavage
Back to top
 
 
  IP Logged
bill67
Serious Thumper
*****
Offline

old  tired

Posts: 8517
genoa city wisconsin
Gender: male
Re: can change pilot and main jet without moving c
Reply #3 - 06/04/09 at 19:19:50
 
   I replaced the fuel bowl with allen bolts,I f I take the bowl off again I will replace with phillip screws their a lot quicker to take off you can spin the screwdriver.
Back to top
 
 

william h krumpen
  IP Logged
dasch
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 1137

Re: can change pilot and main jet without moving c
Reply #4 - 06/05/09 at 00:36:59
 
I got allens, and a cheap set of L-shaped allen wrenches with the ball-shaped end on the long strech of the "L". Those do the job even under slight angle and you can spin them easy. Got them in a chinese shop, like Dollar-tree in US.
Back to top
 
 
  IP Logged
Boule’tard
Serious Thumper
ModSquad
*****
Offline

Master of the
Obvious

Posts: 1620
Austin TX
Gender: male
Re: can change pilot and main jet without moving c
Reply #5 - 06/05/09 at 08:23:29
 
seviersavage wrote on 06/04/09 at 18:11:31:
With my vm carb I can loosen the clamps that hold carb in boots and spin it around to gain access to the jets easy. If you disconect the throttle cable maybe you can spin it in place, make it easier if you can.
Seviersavage

DOH! Why didn't I think of that.  Spent several hours yesterday trying to get the screws out, loosening the top of the battery box, trying to finagle the bowl past the battery box, etc.. but it can be done.
Back to top
 
 

That which can be destroyed by the truth should be. - P.C. Hodgell
  IP Logged
matt
Full Member
***
Offline

da na na na na
mattman

Posts: 228
Winter Springs, FL
Gender: male
Re: can change pilot and main jet without moving c
Reply #6 - 06/05/09 at 09:25:40
 

I have managed to get the entire carb out only removing the gas tank

I dont know if its good practise but i remove the clamps on each end of carb, then i bend the rubber on the backside of the carb back so it gives a few inches to wiggle the carb off the engine.

Eventually im sure the rubber will crack or something but quick carb removal.

Back to top
 
 
  IP Logged
srinath
Serious Thumper
*****
Offline

I love YaBB 1G -
SP1!

Posts: 5349

Re: can change pilot and main jet without moving c
Reply #7 - 06/05/09 at 11:41:07
 
I wont tip the carb if I were doing it, all the crap in the bottom will get into the jets ... OK fine you're replacing the jets ... OK bad example.
Also wiggling the airbox boot is OK it should take a little bit of that just fine.
Also you can replace the manifold to engine bolts with hex head and simply unscrew those and remove the carb with the manifold if you're removing the whole thing.
In fact a virago 1100 has to be removed with 1 manifold still attached ... once again who thought a V twin was the logical way to add displacement. Probably the worst way to add displacement.
Cool.
Srinath.
Back to top
 
 
  IP Logged
Serowbot
YaBB Moderator
ModSquad
*****
Offline

OK.... so what's the
speed of dark?

Posts: 28657
Tucson Az
Gender: male
Re: can change pilot and main jet without moving c
Reply #8 - 06/05/09 at 12:09:05
 
Arms like a monkey you need......
Back to top
 
 

Ludicrous Speed !... ... Huh...
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
09/26/24 at 16:25:33



General CategoryRubber Side Down! › can change pilot and main jet without moving carb?


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.