Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› white spacer mod, now bike runs like a moped
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
white spacer mod, now bike runs like a moped (Read 400 times)
Joshua
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 33
white spacer mod, now bike runs like a moped
06/03/09 at 11:41:42
So I did the white spacer mod this morning. Now the bike drives like a moped. No power to speak of. She barely wants to do 45mph on a flat road. Did I do something wrong? I put in 2 #3 washers and adjusted the floats a little. I'm supposes to go on a 6hr trip this Friday, and this won't work.
Back to top
IP Logged
PTRider
Senior Member
Offline
Posts: 397
Re: white spacer mod, now bike runs like a moped
Reply #1 -
06/03/09 at 11:45:39
Mine runs great. I removed the white spacer and replaced it with a stack of four 3mm washers, then put everything else back together exactly as it came apart.
Back to top
IP Logged
dasch
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 1137
Re: white spacer mod, now bike runs like a moped
Reply #2 -
06/03/09 at 12:09:47
You did something wrong, allright
But is that it? Meaning - no power?? No pops, black smoke, surging, flooding... Any other symptoms?
Back to top
IP Logged
diamond jim
Serious Thumper
Offline
Posts: 1425
North Alabama
Gender:
Re: white spacer mod, now bike runs like a moped
Reply #3 -
06/03/09 at 12:12:19
Assuming the float bowl is correct, I'm thinking it's a diaphram issue. Either the tab wasn't lined up right, the big spring was left out (did that twice but caught it before I put it in), or missing spring on the needle
Back to top
IP Logged
Joshua
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 33
Re: white spacer mod, now bike runs like a moped
Reply #4 -
06/03/09 at 12:25:01
No other symptoms other than it doesn't backfire now on shutdown. I made sure I put tab in the right spot and the both springs are in (I'm pretty sure). It doesn't surge now but it used to a little bit before it was warmed up.
Back to top
IP Logged
srinath
Serious Thumper
Offline
I love YaBB 1G -
SP1!
Posts: 5349
Re: white spacer mod, now bike runs like a moped
Reply #5 -
06/03/09 at 12:26:16
Yea that spring can get bunched up if you dont fit it on right.
Either that, or you activated the moped setting, I have no idea how to fix, it, My virago is in that setting now, and worse yet the GS500 is in the "dead" setting.
Cool.
Srinath.
Back to top
IP Logged
Joshua
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 33
Re: white spacer mod, now bike runs like a moped
Reply #6 -
06/03/09 at 12:31:54
Yeah, I suppose the spring could be bunched up, I can see how that might happen.
Back to top
IP Logged
srinath
Serious Thumper
Offline
I love YaBB 1G -
SP1!
Posts: 5349
Re: white spacer mod, now bike runs like a moped
Reply #7 -
06/03/09 at 12:39:29
To test that, take some chop sticks, and remove the air filter and o in through the air box and stick the chopstick in gently into the air intake and lift the slides, if it dont move smoothly, that = bunch up spring.
That way you will know for sure, it cant be disturbed by your yanking the carb top.
BTW the diaphragm can have a rip in it ... yes that is also moped setting ...
Cool.
Srinath.
Back to top
IP Logged
verslagen1
YaBB Moderator
ModSquad
Offline
Where there's a
will, I want to be
in it.
Posts: 28886
L.A. California
Gender:
Re: white spacer mod, now bike runs like a moped
Reply #8 -
06/03/09 at 13:19:57
Get an original SSM, blessed by the parts man at the local stealership.
Open to page 432, Moped Exercism. With 10mm wrench in hand, clang a nearby toolbox and say " Cast thy moped OUT, in the name of Suzuki, Honda, Izusu and Toyota"
Back to top
Versey's Place
Tech Section Index
IP Logged
DrunkenDwarf
Senior Member
Offline
Morning Zombie
Posts: 325
Seattle, WA
Gender:
Re: white spacer mod, now bike runs like a moped
Reply #9 -
06/03/09 at 13:25:49
Does the material of the washers matter? I'm having difficulty finding smaller than #4 in stainless or nylon.
-D. Dwarf
Back to top
Pearl White 2007 S40; Dyna exhaust; Current jets: 52.5 w/ bleed (2 turns out) / 1.5mm (0.06") spacer / 150; raptor petcock
IP Logged
Joshua
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 33
Re: white spacer mod, now bike runs like a moped
Reply #10 -
06/03/09 at 13:32:42
That's a good question. I would guess that it wouldn't matter as long as the material was gas resistant. I had problems finding smaller washers at lowe's, HD, and ACE. I finally found them at a store called Automotive Fasteners.
Back to top
IP Logged
John_D FSO
Serious Thumper
Offline
Ridin' and smilin'
Posts: 1658
Vancouver, WA
Gender:
Re: white spacer mod, now bike runs like a moped
Reply #11 -
06/03/09 at 14:56:43
I never found any stainless washers smaller than #4, so I went with the #3 with the standard coating, yellow zinc, or something like that? It looks like the hold-down plate on the needle was coated the same way, so if it'll hold up, the washers should too.
Back to top
'07 ElectraGlide.
IP Logged
diamond jim
Serious Thumper
Offline
Posts: 1425
North Alabama
Gender:
Re: white spacer mod, now bike runs like a moped
Reply #12 -
06/03/09 at 15:03:59
So what happens when you install the needle retaining plate upside down with the little nipple up? Probably nothing. But isn't there another hole on that plate- an air passage hole of some type? Can't remember right now.
If not the carb, then maybe the air filter is dirty and the extra gas is not making it run too rich when the main jet kicks in.
Back to top
IP Logged
John_D FSO
Serious Thumper
Offline
Ridin' and smilin'
Posts: 1658
Vancouver, WA
Gender:
Re: white spacer mod, now bike runs like a moped
Reply #13 -
06/03/09 at 15:07:30
The plate on mine had the 2 holes for the hold down screws, and 2 notches of the same dia. They line up with 2 holes in the bottom of the slide thingy. Or at least I hope they do, either way, the bike runs ok.
Back to top
'07 ElectraGlide.
IP Logged
diamond jim
Serious Thumper
Offline
Posts: 1425
North Alabama
Gender:
Re: white spacer mod, now bike runs like a moped
Reply #14 -
06/03/09 at 16:18:04
The notches- that's what I mean. Can the plate be installed wrong and if so what could effects be? Are they for vacuum?
Back to top
IP Logged
Pages:
1
2
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/27/24 at 06:28:45
›
General Category
›
Rubber Side Down!
› white spacer mod, now bike runs like a moped
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.