I installed a set of HD Sportster bars and risers. The chrome was a little too shinny for me, so I buffed them with 600 grit sandpaper. Now they have a satin look without giving up the chrome protection.

The risers are stock HD Sportster as well. I have taken them off and buffed them to a satin finish as well since this picture was taken.

The HD bars had no bar weights so I made my own. I used plastic cigar tubes (Garcia and Vegas English Coronas) and filled them with lead bird shot. A little gorilla glue to seal the cap and a wrap or two of masking tape and they are a perfect fit.
And now just sit back and enjoy a beer and a smoke!