diamond jim wrote on 05/15/09 at 08:41:01:When you do the head bolt torque maintenance, put each tool you use into some sort of container and that will be what you need for just about any problem on the side of the road. That would have your 8mm, 10mm, 12mm, 14mm and 17mm tools (sockets and wrenches) as well as other necessary tools covered. Add some allen wrenches, needle nose pliers, flat head screwdriver, zip ties, electrical tape and whatever else and you've got about everything you need for most jobs except maybe removing the fork tubes or rear tire. Add a 19mm wrench in there for removing/replacing your clutch cable.
forgot the 2 razor blades(wrapped), wire cutters, patch kit, 2 tire spoons...a small tube of form-a gasket is nice too(not many suzi dealers stocking gaskets where you'll break down ill bet)... one of those pocket 12v test lights is a good idea too....belt staple(harley shop, for emergency roadside belt repair) or masterlink, and a mini-maglite because everybody knows you only break down right before it becomes too dark to see...lol 2 20 ft lengths of 10 guage wire with gator clips on the end would make a great set of jumper cables too...