verslagen1
YaBB Moderator ModSquad
Offline
Where there's a will, I want to be in it.
Posts: 28884
L.A. California
Gender:
|
Nah, too easy.
here's the way I've always did it when they were still stock. 1. lift the rear end to take the load off the shocks but not lift the tire. 2. remove all four shock nuts. 3. one shock will be looser than the other, pull it off. 4. take and put the bottom hole on the top bolt. 5. take a allen wrench, the biggest one that will fit, into the adjustment hole, and turn till it next hole. Lower for bigger buts. take off and set aside for now. 6. repete for other side. you may need to raise or lower to releive the shock. both shocks need to be on the same setting. 7. replace both and secure with nuts.
|