SuzukiSavage.com - Looking for advice on how to change wife's S40

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Looking for advice on how to change wife's S40

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Looking for advice on how to change wife's S40 (Read 132 times)

trapper_canada

YaBB Newbies
2005 No Login

Offline

Thumpers are FUN!

Posts: 31

Looking for advice on how to change wife's S40
05/07/09 at 17:10:41

In a nutshell she REALLY loves her bike...and she REALLY wants to have a solo seat / clean fender look.

I told her that with the amount of work (and cost) I think it may take she'd be better off getting a sportster or something...but no.. she is 5'3, 100lbs, and LOVES her Savage.

So. How would one go about doing that? I have NO skill in this area and would have to find someone to do the build.

I was looking in the galleries and saw this great looking bike.

http://suzukisavage.com/gallery/KLennartz6.jpg

That is exactly what she wants.

Isn't their some sort of control module under the pillion? I assume that would have to be moved? I imagine a new fender would need to be sourced? Any thoughts on that?

I went searching through the forum but couldn't find any threads on this topic.

ANY insight, ideas, thoughts, recommendations, anything would be greatly appreciated.

IP Logged

rigidchop Serious Thumper Offline don't feed the drama llama Posts: 1105 ravenswood wv Gender:	Re: Looking for advice on how to change wife's S40 Reply #1 - 05/07/09 at 17:13:59 thas a stock seat(from a savage anyway) and fender. looks like the holes were filled and the flatspots taken out. a few people have moved the rectifier to the airbox.
Back to top	87 VM ED L IP Logged

odvelasc

Ex Member

Re: Looking for advice on how to change wife's S40
Reply #2 - 05/07/09 at 17:16:37

Honestly if you have a garage you can do the work yourself.
Here is a great source for doing any work on the bike.http://suzukisavage.com/cgi-bin/YaBB.pl?num=1236700171
You can totally remove all the struts, seat, brake lights and rear signals yourself. It would take maximum an hour of work. You would probably need some wood blocks or a bike lift to remove the rear tire in order to best remove the rear fender. As for body work you can do it yourself as well. I did body work on my tank with no experience at all and it turned out very good. The fun thing about the savage is that its sooo much fun (and frustrating) to work because it such a simple bike. I think that most people who bob their bike hide all the wires on under ths solo, but that is the creative process.
Try a search in the tech section. By the way. Where you from?

IP Logged

diamond jim Serious Thumper Offline Posts: 1425 North Alabama Gender:	Re: Looking for advice on how to change wife's S40 Reply #3 - 05/07/09 at 17:22:25 Just out of curiosity, ask her if she likes this:
Back to top	IP Logged

trapper_canada YaBB Newbies 2005 No Login Offline Thumpers are FUN! Posts: 31	Re: Looking for advice on how to change wife's S40 Reply #4 - 05/07/09 at 18:20:24 diamond jim wrote on 05/07/09 at 17:22:25: Just out of curiosity, ask her if she likes this: http://i255.photobucket.com/albums/hh128/russ_diamond_jim/girlbike1.jpg She likes it...says it would look even nicer if it was just a solo seat
Back to top	IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male

Re: Looking for advice on how to change wife's S40
Reply #5 - 05/07/09 at 18:45:49

Buy yourself a spare rear fender, and find a body shop that'll do it for you.

But that fender is probably just filled and smoothed with bondo. That, most people can do.

For the tail light, you can get a cat eye to replace the license plate light and use the stock bracket.

Now I'm thinking that's a stock seat, but it may have some reshaping at the back to make it flatter. You can do that with a hair drier.

Versey's Place
Tech Section Index

IP Logged

trapper_canada YaBB Newbies 2005 No Login Offline Thumpers are FUN! Posts: 31	Re: Looking for advice on how to change wife's S40 Reply #6 - 05/07/09 at 20:02:07 hmmm...spare fender.... that might be the best thing. I'll keep an eye ot for one.
Back to top	IP Logged

Demin Serious Thumper Offline We need more chlorine in the gene pool Posts: 2435 Warren,Ohio Gender:	Re: Looking for advice on how to change wife's S40 Reply #7 - 05/08/09 at 05:34:17 Solo seat,with mounting parts,and rear fender about $100.00 Plus paint.
Back to top	Next project:finish '87 Savage custom/bobber/CHOP STYLE***DONE finish '77 Yamaha XS650 bobber Bought another one finish'79 Harley custom bobber(NEXT) IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home