Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
Jet Needle Stopper screws Stripped!!! (Read 95 times)
LazyLemming
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 15

Jet Needle Stopper screws Stripped!!!
04/25/09 at 16:08:42
 
I was trying to get to the white spacer in my carb, and when I tried to remove the two screws, they practically melted under my screwdriver!!  They're pretty badly stripped now, is it possible to get them out with a screw extractor or am I looking at a new Diaphram Assembly now?

Back to top
 
 
  IP Logged
seviersavage
Senior Member
****
Offline

SuzukiSavage.com
Rocks!

Posts: 364
Smoky Mountains Tennessee
Gender: male
Re: Jet Needle Stopper screws Stripped!!!
Reply #1 - 04/25/09 at 16:14:23
 
I got mine out after I stripped them by taking a dremel tool and a flexible extension and drilled into the top of the screw with a small drill bit. This alowed me to get a small ez out to bite into the screw and extract it. It was scary but If I can do it you can.
Seviersavage
Back to top
 
 
  IP Logged
LazyLemming
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 15

Re: Jet Needle Stopper screws Stripped!!!
Reply #2 - 04/25/09 at 20:11:50
 
I got the screws out, now I just can't flipping find the replacements...
Back to top
 
 
  IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: Jet Needle Stopper screws Stripped!!!
Reply #3 - 04/26/09 at 05:38:18
 
Maybe the "Threaded Fasteners" section of the Yellow Pages?
Some places dont have a dedicated nut & bolt store, but maybe theres one not too far away. Take what you have in there & they can match it up. Longview has 2 within 10 blocks so I can usually get what I need.
Back to top
 
 

The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
diamond jim
Serious Thumper
*****
Offline



Posts: 1425
North Alabama
Gender: male
Re: Jet Needle Stopper screws Stripped!!!
Reply #4 - 04/26/09 at 07:12:17
 
Order them from BikeBandit or other reputable sight.  
Back to top
 
 
  IP Logged
John_D FSO
Serious Thumper
*****
Offline

Ridin' and smilin'

Posts: 1658
Vancouver, WA
Gender: male
Re: Jet Needle Stopper screws Stripped!!!
Reply #5 - 04/26/09 at 22:36:16
 
Might try a machine shop, or other type place that would keep a broad selection of fasteners on hand.
Back to top
 
 

'07 ElectraGlide.
  IP Logged
DavetheDog
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 37
Richmond, VA
Gender: male
Re: Jet Needle Stopper screws Stripped!!!
Reply #6 - 04/27/09 at 05:11:52
 
Lazy,

I had the same problem and just barely got them out. I was freakin'. When I did finally get them out, I put each one in a vice, being careful to put just enough pressure to be secured nicely. Then I took a hacksaw and cut a slot into the top of each that was just deep enough to insert a flat head screw driver securely. Cleaned em up real good good and put em back in. Better than ever! Have taken out since a few times in my tuning stages and they still are perfect! One of these days I will find the proper replacement, but in the meantime, this worked out great.
Back to top
 
 
  IP Logged
seviersavage
Senior Member
****
Offline

SuzukiSavage.com
Rocks!

Posts: 364
Smoky Mountains Tennessee
Gender: male
Re: Jet Needle Stopper screws Stripped!!!
Reply #7 - 04/27/09 at 09:25:25
 
If you can locate an Ace hardware they will have them.
Seviersavage
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
09/24/24 at 21:18:31



General CategoryRubber Side Down! › Jet Needle Stopper screws Stripped!!!


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.