Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
going to the shop wish me luck (update) (Read 146 times)
odvelasc
Ex Member




going to the shop wish me luck (update)
04/24/09 at 07:46:23
 
So I have done everything under the sun to get the bike started after installing the daj and the UFO. Had her running a few times and now no start at all. Thanks to all who provided info over the past couple of months, but I found a service shop just outside of town familiar with my mods. They will have to do diagnostics since I already tried everything they had asked about. they have cheap rates too so hopefully she is on the road soon and wont cost me an arm and a leg.
Back to top
 
« Last Edit: 04/24/09 at 15:32:02 by odvelasc »  
  IP Logged
seviersavage
Senior Member
****
Offline

SuzukiSavage.com
Rocks!

Posts: 364
Smoky Mountains Tennessee
Gender: male
Re: going to the shop wish me luck
Reply #1 - 04/24/09 at 08:39:58
 
let us know what the problem turns out to be, good luck.
Seviersavage
Back to top
 
 
  IP Logged
odvelasc
Ex Member




Re: going to the shop wish me luck (update)
Reply #2 - 04/24/09 at 15:41:38
 
Dropped off the keys at the shop and chatted with john the owner. He had me crank it over and nothing. He says "dont be shy keep holding the ignitition" so I do and flippin bike starts right up lol. He tells me it still running rich but I already knew that. He is making me a throttle cable and gonna do the tuning. He is gonna plug the float vent at the bottom of the float bowl and possible install a less restrictive filter if needed. I just dont have time to work on it Sad
Back to top
 
 
  IP Logged
thumperclone
Serious Thumper
Alliance Member
*****
Offline

PGR rider  riding
with respect

Posts: 6061
Grand Junction Colorado
Gender: male
Re: going to the shop wish me luck (update)
Reply #3 - 04/24/09 at 16:57:31
 
personally ive been leary of the DAJ system..
IMO  better to run too rich than too lean
DAJ re quires a lean condition to even engage


too rich is wasted fuel/lube for top cyl, more lube is better
most of us LS riders DONT need hyper peformance which the bike is not designed for... after all its a cruiser
Back to top
 
 

standing for those who stood for US
















  IP Logged
odvelasc
Ex Member




Re: going to the shop wish me luck (update)
Reply #4 - 04/25/09 at 05:37:01
 
thumperclone wrote on 04/24/09 at 16:57:31:
personally ive been leary of the DAJ system..
IMO  better to run too rich than too lean
DAJ re quires a lean condition to even engage


too rich is wasted fuel/lube for top cyl, more lube is better
most of us LS riders DONT need hyper peformance which the bike is not designed for... after all its a cruiser



Different strokes for different folks. For example. My girlfiend likes to join me on little day trips. Thus I bought a drivers backrest and a buttybuddy seat for those occasions. She likes going to the beach on the little suzy with me thus a barrel role and some saddle bags. My girl and beach gear is quite a bit to load on suzi. Thus more power from the mods I put on are definitely needed on those occasions. Until I buy my Kawi Versys next season, the suzi needs a bit of extra umph to meet my needs. Smiley
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
09/27/24 at 00:25:37



General CategoryRubber Side Down! › going to the shop wish me luck (update)


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.