SuzukiSavage.com - Help needed!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Help needed!

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Help needed! (Read 202 times)

Cipolino YaBB Newbies Offline Easy riders live longer! Posts: 49 Cyprus Gender:	Help needed! 03/23/09 at 09:52:26 When i start my bike it makes a strange sound like marbles thrown on the floor (cranking sound) .... like the start buton stays on 4 a while, while the engine is running. where is the problem and what i have to do? is the decompresion solenoid, or the starter?
Back to top	'93 yellow savage, seat mod, SE exhaust, 152 main & 52.5 pilot, cone air filter, drag bar, 4" risers, Ed L fwctrl IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: Help needed! Reply #1 - 03/23/09 at 09:57:43 after it has ran for a few seconds this rattle quits? what year is the bike?
Back to top	IP Logged

Cipolino YaBB Newbies Offline Easy riders live longer! Posts: 49 Cyprus Gender:	Re: Help needed! Reply #2 - 03/23/09 at 10:20:45 it is a '95 model ... after 2-3 sec the noise stops
Back to top	'93 yellow savage, seat mod, SE exhaust, 152 main & 52.5 pilot, cone air filter, drag bar, 4" risers, Ed L fwctrl IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28660 Tucson Az Gender:	Re: Help needed! Reply #3 - 03/23/09 at 10:24:38 My guess,... could be decomp soliniod,... or cam chain adjuster...
Back to top	Ludicrous Speed !... ... ... IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28886
L.A. California
Gender: male

Re: Help needed!
Reply #4 - 03/23/09 at 11:59:45

rattles while starting, or right after it starts?

Is the starter button getting stuck on?

Decomp solenoid doesn't make much noise, only a click.
cam chain wouldn't quit rattling, unless it was converted to a manual adjuster then maybe.

where does it sound like it's coming from?

I'd check for loose bolts and eliminate those. Also check the usual suspects, headlight, speedo.

Versey's Place
Tech Section Index

IP Logged

Kropatchek Serious Thumper Offline Why more than 1 cylinder? Posts: 1457 Alphen a/d Rijn Netherlands Gender:	Re: Help needed! Reply #5 - 03/24/09 at 09:51:51 It's the starterclutch freewheeling after engine start. Don't worry, mine does that for 3 seasons already.
Back to top	Never ask your bike to scream before her throat is warm. '93 Sav in '96 ( yellow) looks IP Logged

Cipolino YaBB Newbies Offline Easy riders live longer! Posts: 49 Cyprus Gender:	Re: Help needed! Reply #6 - 03/24/09 at 12:22:49 i was hopping to make a video for u guys to hear the noise .... ünfortunately"... i just installed a new screaming eagle exhaust ....and .... whaaaaawwwwww ..... it's so loud ....
Back to top	'93 yellow savage, seat mod, SE exhaust, 152 main & 52.5 pilot, cone air filter, drag bar, 4" risers, Ed L fwctrl IP Logged

Cipolino

YaBB Newbies

Offline

Easy riders live
longer!

Posts: 49
Cyprus
Gender: male

Re: Help needed!
Reply #7 - 03/25/09 at 07:42:12

and today i found what was the problem ... unfortunatelly!
the starting idle gear no 2 has some teeth missing ... and today i broke all of them i think coz the starter engine is turning but the ghears wont make the engine start. so now guys i am in a big need of starting iddle gear no 2 and 1, or a starter cluch assembly. anyone have any ideea where i can get these?

'93 yellow savage, seat mod, SE exhaust, 152 main & 52.5 pilot, cone air filter, drag bar, 4" risers, Ed L fwctrl

IP Logged

Morbius YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 9	Re: Help needed! Reply #8 - 04/04/09 at 01:22:32 best prices I've found is cheapcycleparts.com would you mind posting some pics? I'm having some issues reasembling the starter gears.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home