SuzukiSavage.com - Float valve

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Float valve

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Float valve (Read 61 times)

armagedda YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 1	Float valve 03/20/09 at 12:04:04 So my bike was leaking gas like a mofo cause the carb is dirty and i had a friend of mine take it off and clean it out but to no avail. The bike is still leaking gas, does anybody know the correct measurements/level to set the valve at?
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: Float valve Reply #1 - 03/20/09 at 12:34:41 Maybe you need a new valve. checking the float level... if you have a drain valve, stick a clear tube on it, bend it up and open the valve (petcock in prime) the gas should rise up to the gasket on the bowl.
Back to top	Versey's Place Tech Section Index IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Float valve Reply #2 - 03/20/09 at 18:15:47 No clear tube? Lower the end till gas comes up. You have the level in the bowl. Look at the needle valve. If it has a circle driven in it, its a bit tired. Shake the float & see if it has fuel in it. rarely, they can leak.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home