Hey everyone! My savage with no other noticeable electric problems, suddenly lost the rear right turn signal, and running light, after I replaced the front left turn signal.
I still have a brake light.
Any ideas on what could have happened?
The only two fuses I could find under the seat, both 20amp, were intact and functioning.
Is there any combination of wires I might have crossed that could have caused damage to these other lights?
Just stuck up a creek when it comes to wiring problems.
Any help, like always, is greatly appreciated.
Thanks,
-Luke.

thanks, they are all good too. just lost and exhausted with the whole goose chase.
gonna grab a touch of shut eye any check back in the morn.
good night, ya'll.

did you check the bulbs?

Running lights all over or just rear?

Replaced front signal as in the whole signal assembly or just the bulb?

If whole assembly, check if you reversed the wires.

While you're at it, check for shorts in the headlight area, known place for problems.

this is my buddies bike and he doesnt have regular internet access so i'll chime in a bit having seen it. Theres no plate light. The PO installed an aftermarket brake light under the fender. The wiring is pretty hacked up. The PO made an effort to minimize wiring and didnt bother color coding his reroutes and extensions. Its possible he may have mixed up the wiring wen installing the new assembly though. Seems unlikely but maybe.