Did a couple things yesterday afternoon to my bike.
Did an Oil change w/ filter change. I could only find 20w50 in the store. I know the bike cap thing says 10w40. Is the oil I put in too thick? I deff noticed a difference in the clutch. (I took it for a quick spin. 38 degrees is toooooo cold for me to ride in) The clutch felt better. Hard to say how. I know there a graph as to what oils weights you can use and what range in temps but I couldn't re-find it.
I also did the seat lift. I did 6mx50mm bolts. Home depot didn't have 60m. Frigging stores around here....But I did it and used white nylon spacers. I need to use electrical tape to hide the whiteness, but it feels a lot better just from the quick spin I did.
I also put on saddle bags. Not sure what brand. I bought them off of clay for 45 shipped and besides needing some leather cleaner, they are in GOOD shape. Got them on and forced the rear seat on the bike and bolted down. Looks good. I just have to watch out how I dismount the bike. I already caught my foot on them twice. They will add MUCH needed haul-a-bility.
I also checked the cam chain tensioner when I did the oil change. It looks good. It is still very straight on and looks like its working the way it should. I have 5.4k give or take on the bike. When should I start seeing this tensioner start to weaken? I am more then likely going to check every time I change the oil since it's easy enough to at least take a peak.
I'm also looking for a cone filter if you want to help me out
I am also looking for the bolt hole specs on the exhaust support. I want to support my dyna muffler.