Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› 87-05 Bottom end swap ??
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
87-05 Bottom end swap ?? (Read 80 times)
Breeze
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 14
Columbus, Ohio
Gender:
87-05 Bottom end swap ??
01/25/09 at 17:00:26
Evenin all. Been considering getting a back up motor or even an upgrade for the wifes bike. I'd considered a new bottom end for the 5 speed mostly.
I've read thru most of the articles here so far ( i think) and i've checked ron ayers comparing part numbers.
I found a bottom end for a 05 s40 (with just over 800 miles on it). After checking, it appears that the engine covers will all swap over (correct me if i'm wrong). What i'm curious about is...
Will the clutch baskets and plates all swap over.
Will the 87 top end sit on the lower and timing chain work
(the 05 comes with a timing chain so..will this work with the 87 top end)
Will I need to change the front drive for the belt or are they the same.
Will the 87 starter work on the 05 block.
What will I have to watch for or need to do to complete this swap?
Any other parts i'll have to change out to accomplish this?
I appreciate any input the guru's would be willing to share.
Back to top
Twisted Dragon Racing
IP Logged
verslagen1
YaBB Moderator
ModSquad
Offline
Where there's a
will, I want to be
in it.
Posts: 28884
L.A. California
Gender:
Re: 87-05 Bottom end swap ??
Reply #1 -
01/25/09 at 17:32:45
I don't know this for fact, but I'm in the process of doing the same. But my needs have changed since I've started so I don't know when I'll know for sure.
I've been told, no problem old top end on a new bottom.
There might me a difference in the primary drive. But my '88 looks the same as a '96.
Clutch plates should be the same.
Covers I'd worry about. I think there's a difference between the stator cover on the 2 years regarding the starter.
drive belts and pulleys same all years.
don't think a old starter will work with new.
Almost forgot, timing is different between new and old, you'll need to change out the CDI box.
Back to top
«
Last Edit: 01/25/09 at 22:01:28 by verslagen1
»
Versey's Place
Tech Section Index
IP Logged
Breeze
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 14
Columbus, Ohio
Gender:
Re: 87-05 Bottom end swap ??
Reply #2 -
01/26/09 at 09:54:14
Thanx for the info.
I'll have to go back thne and recheck the part numbers. According to Ron Ayers the 87 and the 05 engine covers are the same part numbers.
Thanx for the heads up on the CDI.I'll have to check into this as well then...
Back to top
Twisted Dragon Racing
IP Logged
smokin_blue
Serious Thumper
Offline
From Cafes to
Streetfighters! I
build them all!
Posts: 830
St. Paul, MN
Gender:
Re: 87-05 Bottom end swap ??
Reply #3 -
01/26/09 at 17:55:06
Memory is weak but check the primary gears...I believe there is a difference in number of teeth.
Back to top
My website
http://street-unique.com
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/21/24 at 07:27:37
›
General Category
›
Rubber Side Down!
› 87-05 Bottom end swap ??
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.