SuzukiSavage.com - TURN SIGNALS NOT WORKNG

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › TURN SIGNALS NOT WORKNG

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

TURN SIGNALS NOT WORKNG (Read 59 times)

CyprusCruiser YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 7	TURN SIGNALS NOT WORKNG 01/06/09 at 06:50:10 After changing my turn signals for some new shiny ones they have stopped working and the black box under the tank is making a ticking noise does anyone know what the problem could be? Happy New Year to all !!
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: TURN SIGNALS NOT WORKNG Reply #1 - 01/06/09 at 07:31:07 since you've changed them, did they ever work?
Back to top	Versey's Place Tech Section Index IP Logged

CyprusCruiser YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 7	Re: TURN SIGNALS NOT WORKNG Reply #2 - 01/06/09 at 07:37:50 They worked fine until i changed them, i have checked all the bulbs with volt meter and they are all fine. The wiring is fine but now the black box(relay maybe) is making a ticking noise and theres no power getting to them.
Back to top	IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male

Re: TURN SIGNALS NOT WORKNG
Reply #3 - 01/06/09 at 07:45:44

CyprusCruiser wrote on 01/06/09 at 07:37:50:

They worked fine until i changed them, ?
i have checked all the bulbs with volt meter and they are all fine.
The wiring is fine but now the black box(relay maybe) is making a ticking noise
and theres no power getting to them. ?

What kind of lights did you put in?
2 wire for 2 wire and 3 wire for 3 wire?
HD type lights use the case as ground.
zuk has a ground wire.

Versey's Place
Tech Section Index

IP Logged

CyprusCruiser YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 7	Re: TURN SIGNALS NOT WORKNG Reply #4 - 01/06/09 at 07:55:36 Just 2 for 2
Back to top	IP Logged

T Mack 1 - FSO Serious Thumper Alliance Member Offline sold 2001 LS650 for a 1986 XLH1100 Posts: 2919 Emmaus,Pa Gender:	Re: TURN SIGNALS NOT WORKNG Reply #5 - 01/06/09 at 08:10:20 Is the ticking noise from the turn signal relay (commonly called the flasher,.... that black box) clicking at the normal speed for a turnsignal???
Back to top	Engineers design things, Technicians make them work. --- 30% of being mechanical is confidence/30% is knowing to go slow when needed/30% is looking repeatedly at what you have/10% is dumb luck IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: TURN SIGNALS NOT WORKNG Reply #6 - 01/06/09 at 08:14:37 CyprusCruiser wrote on 01/06/09 at 07:55:36: Just 2 for 2 So you only replaced the back sig's and the fronts are stock? If the fronts don't work now, I'm thinking you hooked the backs in backward. As in the wire you used for positive is hooked into the ground. Try swapping the leads and see what happens.
Back to top	Versey's Place Tech Section Index IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home