justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
The front turn signalsAre always on,The rear are brake lightsand turn signals. So, can you get a lens off the front without tearing it up? I didnt see how to do it & fought it & cracked a lens the first time,Gotta pull the screw then rotate the lens IIRC. Force isnt needed. If you are needing to use force, you are doing something wrong. Once the lens is off, you can see if the other filament light when you hit the turn signal. IF there is the second filament burning & the blinker doesnt "Click" & make the light blink, then either its the wrong or a bad flasher, or the lamp is getting lit from a wire that doesnt go thru that flasher, or the bulb is so low current that it wont make the flasher work.
Hmm, Now this is where I get confused, seems LED lights make flashers run faster? You have a volt/ohm meter? You might as well get one if you dont. Harbor freight has a real cheap one that works just fine. I dropped about $4.00 & got one, even tho I have one from Radio Shack I gave over $80.00 for about 15 years ago. Its nice having one I dont feel obligated to be real careful with. Hope this helps, I doubt we just fixed your problem. Others will come along & add to this & youll have more clues & itll get fixed.. Enjoy!
|