mick
Serious Thumper Alliance Member
Offline
Hell-bound
Posts: 7323
Dayton Oregon
Gender:
|
Ok I'm going to chime in,first off the key to a good paint job is preperation,I cant stress this enough,after you get the job spotless,give it all a good sanding with 600 grit ,finish off with 800 grit, then two coats of under coat,let that dry,then a light sanding with the 800, now two coats of primer,another light sanding, the two coats of sealer, another very light sanding ,watch for sharp edges the the prep coats come off easier from those areas. Ok if you are going with a flat paint ,just spray on 2 or 3 coats and you done. if you want shine use a two stage paint,two or three coats ,let it tack off,then two coats of clear,your done. I have done alot of painting , and I managed a paint shop for a few years. I will assume you have spray gun and compressor,maskes and so on. If you are going with rattle cans,follow directions on the can. You never said what color your going with.
|