SuzukiSavage.com

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › timing

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

timing (Read 122 times)

kennycreed Senior Member Alliance Member Offline Posts: 348 Island Of Lewis SCOTLAND Gender:	timing 10/22/08 at 09:08:12 hi would the engine run if the valves were timed wrong. Say on the induction instead of the compression
Back to top	trying to be as good a person as my dog thinks I am IP Logged

PipJones Full Member Offline Posts: 146 Fort Worth, Tx Gender:	Re: timing Reply #1 - 10/22/08 at 09:46:16 it would make sense that it would, single piston, intake and exhaust strokes are the exact same.... up and down. but i could be wrong, depends on if the spark plug fires every stroke or every other stroke. but i would assume it would since it is carbureted instead of fuel injected.
Back to top	Gargle, sputter, burp and die!!! The ways of my LS650!!!!! IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28908
L.A. California
Gender: male

Re: timing
Reply #2 - 10/22/08 at 11:21:56

kennycreed wrote on 10/22/08 at 09:08:12:

hi would the engine run if the valves were timed wrong. Say on the induction instead of the compression

Are you saying that the intake valve open on the compression stroke?
If so, no. Don't think it would run. And I don't think it would rotate for very long either. As the valves would hit the piston.

Versey's Place
Tech Section Index

IP Logged

srinath Serious Thumper Offline I love YaBB 1G - SP1! Posts: 5349	Re: timing Reply #3 - 10/22/08 at 12:40:20 Cam chain off by 1 tooth and it may not run at all, and if it did run it will be horrible. Off by 2 ... nope it wont run. Cool. Srinath.
Back to top	IP Logged

kennycreed Senior Member Alliance Member Offline Posts: 348 Island Of Lewis SCOTLAND Gender:	Re: timing Reply #4 - 10/22/08 at 13:02:09 thanks all for that, thats not what it is as she runs for about ten seconds and wont take any throttle.. Cant be the carb, put carb from other bike on, just same, put what I thought was my duff carb on other bike and it ran perfect, could the cd unit(brain box) be faulty even if there is a good spark
Back to top	trying to be as good a person as my dog thinks I am IP Logged

srinath Serious Thumper Offline I love YaBB 1G - SP1! Posts: 5349	Re: timing Reply #5 - 10/22/08 at 13:27:32 OH, OK, does it stall after 10 seconds. Then what does it do. Wont start back up again ? Prolly not black box, maybe the crank trigger. left side next to the stator. Cool. Srinath.
Back to top	IP Logged

kennycreed Senior Member Alliance Member Offline Posts: 348 Island Of Lewis SCOTLAND Gender:	Re: timing Reply #6 - 10/22/08 at 13:55:28 hi srinath she just wont fire again until i strip the tank off and clean the plug, what is the crank trigger and what does it do,,is it inside the casing, what is it?, i am willing to try anything cheers K
Back to top	trying to be as good a person as my dog thinks I am IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28908 L.A. California Gender:	Re: timing Reply #7 - 10/22/08 at 17:17:59 I suppose he's talking about the sensor for timing the spark. So you got 2 bikes exactly the same? Which carbs and same issue. Almost elim's a carb problem. tell us how you start it, maybe something there.
Back to top	Versey's Place Tech Section Index IP Logged

kennycreed

Senior Member
Alliance Member

Offline

Posts: 348
Island Of Lewis SCOTLAND
Gender: male

Re: timing
Reply #8 - 10/23/08 at 01:33:28

Tank tap on reserve,(tank half full) choke about half way out, igniton on, press start, once she fires I tried everything to keep her running,,choke in,,out.halfway, Embarrassed

no choke,different settings on throttle, blipping it ,trying it at all settings,,It can't be the carb because it works fine on the other bike, could the bike run if the sensor was lose or had shifted,,where is it is it inside the left hand crankcase cover and is it a straight forward job, :'( :'( :'( :'(thank you...

trying to be as good a person as my dog thinks I am

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28908 L.A. California Gender:	Re: timing Reply #9 - 10/23/08 at 11:12:26 does it take a long time to start or right away? check you exhaust for blockage. check the fuel flow to the carb, open bottom drain, which to prime, put cup/bowl/pan under carb, how fast does it flow? if you got two common bikes swap out the coil. check your ground too
Back to top	Versey's Place Tech Section Index IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home