SuzukiSavage.com - RPM

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › RPM

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

RPM (Read 97 times)

Eddy Thomas YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 31 Rocklin Ca. Gender:	RPM 09/20/08 at 16:24:05 Hey guys what kind Revs can we expect out of the LS 650?? I put on a tac. it was a piece of cake..
Back to top	IP Logged

vtail Senior Member Offline life's short, ride fast Posts: 408 Portland,OR Gender:	Re: RPM Reply #1 - 09/20/08 at 16:44:55 Eddy Thomas wrote on 09/20/08 at 16:24:05: Hey guys what kind Revs can we expect out of the LS 650?? I put on a tac. it was a piece of cake.. 15 mph per 1000 rpm with 140/90/15, 14.5 mph/1000 rpm with the stock tire;)
Back to top	'07, White spacer REMOVED, 152,5 main jet, K&N drop-in filter, Mac exh, Sigma 906, ENM PT15B2 tach, factory s bags, shield, backrest/lug rack, crashbar, Kuryakyn 7980 ext hwy pegs,412-4233C+'09 C50T IP Logged

Eddy Thomas YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 31 Rocklin Ca. Gender:	Re: RPM Reply #2 - 09/20/08 at 16:53:38 WHAT? how about a number like 6500 8500the tac works fine I dont know the factory max..
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28644 Tucson Az Gender:	Re: RPM Reply #3 - 09/20/08 at 17:02:58 6500rpm
Back to top	Ludicrous Speed !... ... ... IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: RPM Reply #4 - 09/20/08 at 17:06:48 6500 should have you doin' a ton
Back to top	Versey's Place Tech Section Index IP Logged

T Mack 1 - FSO Serious Thumper Alliance Member Offline sold 2001 LS650 for a 1986 XLH1100 Posts: 2919 Emmaus,Pa Gender:	Re: RPM Reply #5 - 09/20/08 at 18:15:21 2001 LS650, new 140/90-15 rear tire. Fifth gear... 55 mph.... just above 3500.... aaaaa maybe 3700 60 mph.... around 4000 65 mph.... around 4500 Third gear about 25 mph, about 2500 rpm, but..... a lot was going on when I was looking so the speed / RPM could be off a little....
Back to top	Engineers design things, Technicians make them work. --- 30% of being mechanical is confidence/30% is knowing to go slow when needed/30% is looking repeatedly at what you have/10% is dumb luck IP Logged

Eddy Thomas YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 31 Rocklin Ca. Gender:	Re: RPM Reply #6 - 09/20/08 at 20:27:40 OK guys THANKS now I got a clue.....
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home