Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Clutch reassembly problems
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Clutch reassembly problems (Read 53 times)
eanon
Full Member
Offline
Thump-Thump-Thu mp
Posts: 219
Austin, Texas
Gender:
Clutch reassembly problems
09/16/08 at 15:22:31
As some of you may recall, I recently broke my release cam removing the clutch cover. I got the new part in today, and now it doesn't seem to want to go back together. As far as I can tell, everything is assembled correctly, but when I put the clutch cover back on (no bolts, just in place), the release arm is all but slack, and will not travel far enough upward. (If I pull on the clutch cable, the clutch cover pops off). If I reinstall the bolts on the clutch cover, I only get about about an inch of travel in the clutch cable before it stops. (Feels like I'm gonna brake something again if I keep pulling.) Push rod, guide, bearing and release plate all seem to be in good order. Didn't want to take anything else apart if I didn't have to. The rod is sticking out of the guide/plate between 7/16ths and a half and inch. Anybody got any ideas?
Back to top
Red '97, cone filter, 150 main, 52.5 Pilot, half spacer, Screaming Eagle turnout, 17/43 chain drive, shield, de-badged, 4" forward control extensions. Gettin' there.
IP Logged
verslagen1
YaBB Moderator
ModSquad
Offline
Where there's a
will, I want to be
in it.
Posts: 28884
L.A. California
Gender:
Re: Clutch reassembly problems
Reply #1 -
09/16/08 at 20:40:20
clutch cover popping off... normal
An inch of travel in the clutch cable, wow! I only get a 1/4"
Back to top
Versey's Place
Tech Section Index
IP Logged
eanon
Full Member
Offline
Thump-Thump-Thu mp
Posts: 219
Austin, Texas
Gender:
Re: Clutch reassembly problems
Reply #2 -
09/17/08 at 14:27:01
Turns out the clutch cable was loose as well. After tightening everything back up, looks like she's gonna run great. The tip about clutch cable travel is what got me thinking.... Thanks verslagen.
Back to top
Red '97, cone filter, 150 main, 52.5 Pilot, half spacer, Screaming Eagle turnout, 17/43 chain drive, shield, de-badged, 4" forward control extensions. Gettin' there.
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/21/24 at 07:36:48
›
General Category
›
Rubber Side Down!
› Clutch reassembly problems
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.