justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
Thats the biggest Rube Golberg bead breaker I can imagine. Mine didnt want to let go, so, Naturally,
Pull the Shrader valve block the whole thing off the ground with a 2X4 under the middle & whatever it takes to put on the sides to keep it stable, I dont tremember what I used. Another 2X4, Long enough to deal with the pressure needed, mine was 8 feet long. a short piece of 4X4, across the tire, just as close to the rim as possible & not catch on it. The rope is only wrapped around & tied, so you can play with it & get the space between boards when it starts pressing hard on the tire. Its like a BIGGO nutcracker, with a 4X4 across the main "cracker" handle.
If it's so tuffa nut to crack, then, yea, stand the boards on edge, the lower one will require braces nailed to it to keep all the rasslin from knocking it over. If the rope isnt real stout, go around a few times. I started with not enough slack & had to re-do the rope, allowing the board ends to be further apart when the 4X4 was starting to press hard on the tire. No car should be needed, IMO.
|