SuzukiSavage.com - ignition question

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › ignition question

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

ignition question (Read 44 times)

Jimmer Senior Member Offline SuzukiSavage.com Rocks! Posts: 497 NewportPa. Gender:	ignition question 09/03/08 at 03:42:13 Can anyone tell me what the two small pieces located behind the brass fitting on the plug wire are. They are about 1/8th in diameter and 1/2 inch long. Is there a way to replace them, I lost one when I was checking [being noisy]out the plug wire. Thanks for your help.
Back to top	IP Logged

T Mack 1 - FSO

Serious Thumper
Alliance Member

Offline

sold 2001 LS650 for
a 1986 XLH1100

Posts: 2919
Emmaus,Pa
Gender: male

Re: ignition question
Reply #1 - 09/04/08 at 19:03:16

Jimmer wrote on 09/03/08 at 03:42:13:

Can anyone tell me what the two small pieces located behind the brass fitting on the plug wire are. They are about 1/8th in diameter and 1/2 inch long. Is there a way to replace them, I lost one when I was checking [being noisy]out the plug wire. Thanks for your help.

The high voltage plug wire????? If so, one side is a resistor cap piece on the sparkplug side. Other side stays in the coil.

If not the HV wire, then not sure.....

Engineers design things, Technicians make them work.
---
30% of being mechanical is confidence/30% is knowing to go slow when needed/30% is looking repeatedly at what you have/10% is dumb luck Wink

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home