Got my National Cycle windshield in. Spend an extra $90 for the heavy duty 4.5mm better acrylic instead of the cheaper/weaker 3.0mm poorer quality plastic shield.
First off, the fork mount was a PITA to get mounted. Then I discovered I put in on too high and the edge was right in my line of sight. So... I pulled the headlight and dropped the mounts down a couple of inches; and also put on some 2-3" taller Harley bars. Now I can see over it alright; but in every configuration I've tried it makes the bike feel wobbly at over 70mph!
Never had this trouble with any set of bars on any of my Savages before. I've looked the shield over from every direction, and measured it many ways and it appears to be on good and straight, and regardless of angle (direction recommend starting with same as fork angle) it still wants to wobble the bike. Almost feels like a high speed wobble, but at only 70+mph!
I'm going to move my Tkat fork brace over from the chopper and see if that helps... beyond that I'm at a loss.
Also, the increased wind resistance makes it so that the bike will barely pull fifth gear with my 17:43 chain conversion. I had no problems with that before the windshield.
So far I'm not very happy with my $200 windshield as you might guess!
I've never had any other windshields other than a couple of Vetter full fairings, and they were great for comfort, and never seemed to hold the bikes back. Even when I had one of the big things on my little Yamaha SR500.
I'm a bit puzzled... Anyone have any clues as to what might be wrong?
Adding picture: