Jack_650
Senior Member
Offline
I love YaBB 1G - SP1!
Posts: 463
Minnesota
Gender:
|
That yellow was as close to the original 2k 650 yellow as the company had in stock. They can match pretty much any color, but it gets expensive quick. So I just went with what was close. I had all the metalwork done at once so there was only one set-up charge. They had some problems with my bodywork patching getting an even coat over the two different materials. Even at that I got it all for about $250. Just check your area for coating services and go in and talk to them.
The set-up charge is a spendy deal so take in as much stuff as you want done all together. New trips new set-up costs. Talk to them and you'll probably find at least one of the guys has a bike. Make sure you go back and show them the finished product. My guys came out and took pictures for their catalogue.
Since then I've been pretty hard on the bike, long trips with rubbing tie-down straps and the like, so there's plenty of scrapes and scratches. The finish has held up way better than paint would have though, what with the abuse I put it through.
Jack
|