SuzukiSavage.com - oil cooler

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › oil cooler

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

oil cooler (Read 169 times)

mick Serious Thumper Alliance Member Offline Hell-bound Posts: 7323 Dayton Oregon Gender:	oil cooler 08/17/08 at 01:17:01 any one here fitted an oil cooler ,if so details please.
Back to top	Science and Logic fly you to the moon, Religion makes you fly into skyscrapers IP Logged

Oldfeller--FSO Serious Thumper ModSquad Offline Hobby is now "concentrated neuropany" Posts: 12673 Fayetteville, NC Gender:	Re: oil cooler Reply #1 - 08/17/08 at 07:01:15 Ed L has an oil cooler mounted on his bike. PM him to get his attention. http://suzukisavage.com/cgi-bin/YaBB.pl?action=viewprofile;username=5A7B40533...
Back to top	Former Savage Owner IP Logged

Ed L. Serious Thumper Alliance Member Offline "We All go a Little Crazy Sometimes" Norman Bates Posts: 2808 Sunny Florida Gender:	Re: oil cooler Reply #2 - 08/17/08 at 17:13:10 I'm working on a passive system, basicly attaching some aluminum fins on the oil filter cover to increase the surface area which will help with cooling. I also have installed a oil cooler off of a GRX'er which involved drilling and tapping the side cover over the oil filter cavity.
Back to top	Silver '02, clubman handle bars, Cobra headlight, Sportster muffler, K+N stock air filter, 152.5 main, Superbrace, oil cooler, 1/2 inch aluminium plate forward controls, spark advance, goes like stink IP Logged

Carl YaBB Newbies Offline I love YaBB 1G - SP1! Posts: 20 Larnaca, Cyprus Gender:	Re: oil cooler Reply #3 - 08/18/08 at 09:40:13 Hi Mick I have fitted an Oil cooler to my 1993 Savage and find it reduces the Oil temp by about 15-20C (Mine is pumbed in Full flow) Regards Carl
Back to top	IP Logged

mick Serious Thumper Alliance Member Offline Hell-bound Posts: 7323 Dayton Oregon Gender:	Re: oil cooler Reply #4 - 08/18/08 at 11:05:40 Carl wrote on 08/18/08 at 09:40:13: Hi Mick I have fitted an Oil cooler to my 1993 Savage and find it reduces the Oil temp by about 15-20C (Mine is pumbed in Full flow) Regards Carl Hi Carl. Have you any pics? and some more info on how to fit it.
Back to top	Science and Logic fly you to the moon, Religion makes you fly into skyscrapers IP Logged

barry68v10 Serious Thumper Offline Posts: 955 Maryland Gender:	Re: oil cooler Reply #5 - 08/18/08 at 13:27:23 I used the same technique as Ed_L to mount a frame-rail tranny cooler as a m/c oil cooler. Not quite full-flow drops temps about 10-15C... There's a full writeup in the Tech section last time I checked (several months ago...)
Back to top	petc0ck mod, white spacer removed, 150 main jet, 12.5" shocks, 16" turnout muff, oil cooler mod, chain conversion, Tkat brace, external fuel filter, fuel screen removed... IP Logged

Carl

YaBB Newbies

Offline

I love YaBB 1G -
SP1!

Posts: 20
Larnaca, Cyprus
Gender: male

Re: oil cooler
Reply #6 - 08/18/08 at 21:29:39

Hi Mick
I Followed the Write up in the Tech section on the plumbing & Mounting of the cooler, however I managed by Trimming the Banjo bolt head to feed the oil back into the bottom plug and avoid drilling the casing.
(You have to do some dismantling & moving of the engine to get the new pipe & bolt in.
I also removed the side cover and plugged the internal feed to make the cooler full flow.
Have a look in the Tech section for the fitting and if you need further help I will get some photo's of my installation and look up my notes on the fitting
Regards
Carl

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home