Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
? on idle mixture screw...... (Read 104 times)
lokjaw777
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 24

? on idle mixture screw......
08/05/08 at 15:43:49
 
i bought a 02 about a month ago an she runs great ....very little backfiring on up an down shift....but i have noticed if i pull choke out to the firstnotch it runs real smooth but...idles like sh!t....so will adjusting the screw help without the white spacer mod.............
Back to top
 
 
  IP Logged
Serowbot
YaBB Moderator
ModSquad
*****
Offline

OK.... so what's the
speed of dark?

Posts: 28651
Tucson Az
Gender: male
Re: ? on idle mixture screw......
Reply #1 - 08/05/08 at 16:07:58
 
If she runs great with-out choke, just don't pull the choke.
What am I missing?  Why do any mods?
Back to top
 
 

Ludicrous Speed !... ... Huh...
  IP Logged
lokjaw777
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 24

Re: ? on idle mixture screw......
Reply #2 - 08/05/08 at 16:40:54
 
it just seems to run smoother an shift without any backfiring....even feels like better throttle response.....i only noticed it when i forgot to push the choke all the way in... i thought it was the new plug i put in but when i parked at my shop it idled like sh!t....then i found the choke one notch out
Back to top
 
 
  IP Logged
Yonuh Adisi FSO
Serious Thumper
*****
Offline

Savage Jedi (Knight)

Posts: 3622
Pilot Valley NV, aka Tatooine
Gender: male
Re: ? on idle mixture screw......
Reply #3 - 08/05/08 at 17:03:22
 
The choke is actually an enrichener, when you left it out one notch you were adding fuel as you were riding which of course richened your mix negated the stock lean condition. But as you idled it was trying to flood.

Back to top
 
 

Check out Flight of Destiny http://www.amazon.com/dp/B00H9130XC
  IP Logged
lokjaw777
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 24

Re: ? on idle mixture screw......
Reply #4 - 08/05/08 at 17:12:57
 
thank you.....thank you verry much........
Back to top
 
 
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male
Re: ? on idle mixture screw......
Reply #5 - 08/05/08 at 17:21:56
 
I can't recommend running one knotch out for very long.  Too much fuel will wash the oil off of your cylinder walls causing excessive ring wear.  And in turn increasing your oil consumption.

Get a jet kit from lancer in the market place and do it right.
Back to top
 
 
WWW   IP Logged
GrateFuLDad
Full Member
***
Offline



Posts: 145
Boiling Springs,SC
Gender: male
Re: ? on idle mixture screw......
Reply #6 - 08/05/08 at 18:38:28
 
verslagen1 wrote on 08/05/08 at 17:21:56:
I can't recommend running one knotch out for very long.  Too much fuel will wash the oil off of your cylinder walls causing excessive ring wear.  And in turn increasing your oil consumption.

Get a jet kit from lancer in the market place and do it right.


i have a pretty brand new 03.... does this mean that the factory jets are to small and need to be a little bigger jetted?

i havent yet tackled the carb on this bike and have only messed with the vw solex carbs and holley 5200 series carbs...

i hope i can figure this one out as soon as i sit down with it...
seems i got some backfiring on shifting most of the time but havent narrowed down exacts  of when.....

also the bike gives a poot pop type sound after you shut if off everytime,... long riding or short riding



Back to top
 
 

Hang up that cell phone and let us that Ride LiVE....~!~

standingbearz   IP Logged
Yonuh Adisi FSO
Serious Thumper
*****
Offline

Savage Jedi (Knight)

Posts: 3622
Pilot Valley NV, aka Tatooine
Gender: male
Re: ? on idle mixture screw......
Reply #7 - 08/05/08 at 18:42:54
 
GrateFuLDad wrote on 08/05/08 at 18:38:28:
verslagen1 wrote on 08/05/08 at 17:21:56:
I can't recommend running one knotch out for very long.  Too much fuel will wash the oil off of your cylinder walls causing excessive ring wear.  And in turn increasing your oil consumption.

Get a jet kit from lancer in the market place and do it right.


i have a pretty brand new 03.... does this mean that the factory jets are to small and need to be a little bigger jetted?

i havent yet tackled the carb on this bike and have only messed with the vw solex carbs and holley 5200 series carbs...

i hope i can figure this one out as soon as i sit down with it...
seems i got some backfiring on shifting most of the time but havent narrowed down exacts  of when.....

also the bike gives a poot pop type sound after you shut if off everytime,... long riding or short riding





Suzuki tuned these bikes extremely lean from the factory to meet EPA guidelines.
Back to top
 
 

Check out Flight of Destiny http://www.amazon.com/dp/B00H9130XC
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
09/25/24 at 00:21:32



General CategoryRubber Side Down! › ? on idle mixture screw......


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.