Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Adifferent kind of seat mod...with pics
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
Adifferent kind of seat mod...with pics (Read 375 times)
Toymaker
Serious Thumper
Offline
Dragon Rider
Posts: 1534
Granite Falls, NC
Gender:
Adifferent kind of seat mod...with pics
07/22/08 at 13:26:32
Here is my solution for the dreaded "Deadbutt" that we get while riding our savages/s40s.
In the first pic. You can see that I have raised the front seat connection point by 2 inches. I used 3/8 id plactic pipe as the spacers.
In the second picture, you can see that I drilled two small holes and screwed in to sheet metal screws to keep the secondary seat supports in line with the frame.
Back to top
Because I can!
IP Logged
Toymaker
Serious Thumper
Offline
Dragon Rider
Posts: 1534
Granite Falls, NC
Gender:
Re: Adifferent kind of seat mod...with pics
Reply #1 -
07/22/08 at 13:30:17
Now for the mods to the seat itself. If you turn your seat upside-down, there are two rubber stoppers. I pulled these off. There is a hole where there were. I took a piece of 3/8 inch wooden dowel and sanded it so that the end of the dowel will fit in the holes. Then I sanded a concave face into the 3/8 pipe where it will sit on the frame. (the screwheads of the sheet metal screws fit inside the pipe ends to help keep them from moving around.
Back to top
Because I can!
IP Logged
Toymaker
Serious Thumper
Offline
Dragon Rider
Posts: 1534
Granite Falls, NC
Gender:
Re: Adifferent kind of seat mod...with pics
Reply #2 -
07/22/08 at 13:33:04
This finishes the front of the seat. After I raised the front, I realized there was a lot of space between the rubber cushion under the seat and the frame. I cut two pieces of wood (1 for each side) and using an old piece of inner tube, I fastened these wood pieces to the rubber cushion on the bottomside of the seat.
Back to top
Because I can!
IP Logged
Toymaker
Serious Thumper
Offline
Dragon Rider
Posts: 1534
Granite Falls, NC
Gender:
Re: Adifferent kind of seat mod...with pics
Reply #3 -
07/22/08 at 13:36:39
Lastly, I moved the mounting brackets on the seat a little. All I did was remove the bolts and instead of using 2 bolts to hold the bracket, I offset it and moved it back the length of the bracket and used just one bolt to hold it.
Now put the seat back on, and this is what it should look like.
Back to top
Because I can!
IP Logged
flcruzr
Ex Member
Re: Adifferent kind of seat mod...with pics
Reply #4 -
07/22/08 at 18:39:48
Thanks for this informative post! Another great idea!
Back to top
IP Logged
Toymaker
Serious Thumper
Offline
Dragon Rider
Posts: 1534
Granite Falls, NC
Gender:
Re: Adifferent kind of seat mod...with pics
Reply #5 -
07/22/08 at 18:55:18
Thanks, however, I forgot to say how tall I went. The spacer pipes on the front mount are 2", as are the seat support pipes. The wooden spacers are 1" tall.
Back to top
Because I can!
IP Logged
Starzuki
YaBB Newbies
Offline
Is today your day?
Posts: 41
Re: Adifferent kind of seat mod...with pics
Reply #6 -
07/22/08 at 21:03:44
Great work!!
Now if we could just get some one to make a stretched tank to fill in around the seat!
Back to top
IP Logged
zilla
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 29
Re: Adifferent kind of seat mod...with pics
Reply #7 -
07/22/08 at 21:11:43
That could cure my problem of getting my sac pinched betwixt the tank and saddle. (I roll commando) And happen to be 6'2"
Back to top
IP Logged
Wagslick
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 25
Re: Adifferent kind of seat mod...with pics
Reply #8 -
07/22/08 at 22:20:09
zilla wrote
on 07/22/08 at 21:11:43:
... (I roll commando) And happen to be 6'2"
Gross.... get a helmet for that thing.
Back to top
IP Logged
Jay
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 1445
Fort Worth, Texas
Gender:
Re: Adifferent kind of seat mod...with pics
Reply #9 -
07/23/08 at 02:06:28
Toymaker,
Awesome post, and thanks for the pics. I'm considering doing something very similar to my '08, one piece seat. Your post really helped gel up the ideas in my head.
Back to top
You're invisible and naked.
Ride safe,
Jay
IP Logged
FreeSpirit
Serious Thumper
Offline
Joy is my Compass !
Posts: 3823
North Georgia
Gender:
Re: Adifferent kind of seat mod...with pics
Reply #10 -
07/23/08 at 12:12:01
Toymaker wrote
on 07/22/08 at 13:33:04:
This finishes the front of the seat. After I raised the front, I realized there was a lot of space between the rubber cushion under the seat and the frame. I cut two pieces of wood (1 for each side) and using an old piece of inner tube, I fastened these wood pieces to the rubber cushion on the bottomside of the seat.
http://i307.photobucket.com/albums/nn298/ToymakerNC/IMG_0016.jpg
Question....How did you fasten them? with what? Looks good,just trying to understand each step.
Back to top
2002 Suzuki Savage-Stock.Windshield,Saddle bags,Hwy Bars,Tank Bib.Custom Paint.
IP Logged
Toymaker
Serious Thumper
Offline
Dragon Rider
Posts: 1534
Granite Falls, NC
Gender:
Re: Adifferent kind of seat mod...with pics
Reply #11 -
07/23/08 at 12:40:29
I fastened the wooden blocks with a piece of rubber from an old inner tube. I took rubber cement and glued the inner tube piece to the side of the seat rubber then put the block on top of the seat rubber and wrapped the inner tube piece around it and rubber cemented it in place. Then I took my staple gun and stapled it in a few places so the rubber wouldn't move.
Does that help?
Back to top
Because I can!
IP Logged
Keith_T
Senior Member
Offline
Posts: 289
Northern Illinois
Gender:
Re: Adifferent kind of seat mod...with pics
Reply #12 -
07/23/08 at 12:51:40
How much better is the comfort factor for you with the mod?
Back to top
IP Logged
FreeSpirit
Serious Thumper
Offline
Joy is my Compass !
Posts: 3823
North Georgia
Gender:
Re: Adifferent kind of seat mod...with pics
Reply #13 -
07/23/08 at 14:14:01
Toymaker wrote
on 07/23/08 at 12:40:29:
I fastened the wooden blocks with a piece of rubber from an old inner tube. I took rubber cement and glued the inner tube piece to the side of the seat rubber then put the block on top of the seat rubber and wrapped the inner tube piece around it and rubber cemented it in place. Then I took my staple gun and stapled it in a few places so the rubber wouldn't move.
Does that help?
Yes,Very much
After I raised the seat,last year,the middle felt sunken like it had no foam,very uncomfortable.
So,this is good info
Back to top
2002 Suzuki Savage-Stock.Windshield,Saddle bags,Hwy Bars,Tank Bib.Custom Paint.
IP Logged
Toymaker
Serious Thumper
Offline
Dragon Rider
Posts: 1534
Granite Falls, NC
Gender:
Re: Adifferent kind of seat mod...with pics
Reply #14 -
07/23/08 at 14:33:51
Keith_T wrote
on 07/23/08 at 12:51:40:
How much better is the comfort factor for you with the mod?
Well, the mod allows me to ride farther back on the seat, plus, with the height adjusted, I noticed a change in my leg angle. I was planning on installing Ed.L's forward controls, but now, I am not so sure. I was trying to see how it would feel...like sitting in a lounge chair.
So, the comfort level is improved for me. I'm 5'11 and 230 lbs. So anything I can do for my butt is welcomed.
PS, since the mod, I have moved the pillion seat back as well, about 1 inch or so. My daughter says it takes a lot of the vibration away because now the seat is tight against the sissy bar.
Back to top
Because I can!
IP Logged
Pages:
1
2
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/21/24 at 12:50:49
›
General Category
›
Rubber Side Down!
› Adifferent kind of seat mod...with pics
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.