SuzukiSavage.com - Blinker will not work

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Blinker will not work

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Blinker will not work (Read 74 times)

shermeco Junior Member Offline SuzukiSavage.com Rocks! Posts: 65	Blinker will not work 07/20/08 at 15:38:23 just what it says the blinkers will not turn on at all any ideas would be great thanks guys
Back to top	IP Logged

Moofed

Full Member
Alliance Member

Offline

...and the engine
just gleams...

Posts: 148
Bloomington, Indiana
Gender: male

Re: Blinker will not work
Reply #1 - 07/20/08 at 16:28:09

Did it get rained on a bunch? Mine like to stop working (or sometimes flash once then stop) if it sits out in a rain storm. My current theory is water gets into the switch housing and pools there. I got that theory after an intense storm hit (the one that kicked off the flooding in the midwest a couple months ago) and not only did the signals not blink, the starter came on randomly whenever the clutch was pulled in. Shocked

IP Logged

justin_o_guy2

Serious Thumper

Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.

Re: Blinker will not work
Reply #2 - 07/20/08 at 16:54:08

I would hit the emergency flashers & see if anything happens. Not sure what you will learn from it, have to look at a wiring diagram & see IF it will help at all. If you take the switch apart, be sure to clean the floor first, so if any tiny bits hit, you can find them. Cover the tank with something, so if you fumble any tools, it wont get a ding. While in there, clean & coat with dielectric grease.

The people never give up their liberties but under some delusion.- Edmund Burke.

IP Logged

shermeco Junior Member Offline SuzukiSavage.com Rocks! Posts: 65	Re: Blinker will not work Reply #3 - 07/20/08 at 19:37:40 I dont have flashers mine is a 96 but i will try cleaning it out thank you all
Back to top	IP Logged

T Mack 1 - FSO Serious Thumper Alliance Member Offline sold 2001 LS650 for a 1986 XLH1100 Posts: 2919 Emmaus,Pa Gender:	Re: Blinker will not work Reply #4 - 07/21/08 at 17:14:01 Also check for dirty / corroded connections in all the blinker circuitry. Including the flasher.
Back to top	Engineers design things, Technicians make them work. --- 30% of being mechanical is confidence/30% is knowing to go slow when needed/30% is looking repeatedly at what you have/10% is dumb luck IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home