SuzukiSavage.com - trouble with idle

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › trouble with idle

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

trouble with idle (Read 68 times)

oksavage

Junior Member

Offline

Posts: 91

Gender: male

trouble with idle
07/16/08 at 17:42:26

i just replaced my sparkplug and cleaned my carb. I'm running a 155 main jet and the stock pilot jet. I have a Jardine slip-on. Now I got it all back together and it started right up. yeah!!!! but it doesn't want to idle I turned up the idle screw almost all the way. when you give it about 1/4 throttle it sounds good. also when you give it 3/4 throttle or better it stutters a little. where should I start looking?? is it possible for throttle cables to stretch?? mine has a lot of play

IP Logged

Yonuh Adisi FSO Serious Thumper Offline Savage Jedi (Knight) Posts: 3622 Pilot Valley NV, aka Tatooine Gender:	Re: trouble with idle Reply #1 - 07/16/08 at 17:49:19 It sounds like your stock pilot jet is too small, and you may possibly need to do the white spacer mod.
Back to top	Check out Flight of Destiny http://www.amazon.com/dp/B00H9130XC IP Logged

oksavage Junior Member Offline Posts: 91 Gender:	Re: trouble with idle Reply #2 - 07/16/08 at 17:51:18 so does the pilot jet size determine the amount of fuel at 0 throttle
Back to top	IP Logged

Yonuh Adisi FSO Serious Thumper Offline Savage Jedi (Knight) Posts: 3622 Pilot Valley NV, aka Tatooine Gender:	Re: trouble with idle Reply #3 - 07/16/08 at 17:54:26 Simple answer: Yes and the white spacer mod controls midrange.
Back to top	Check out Flight of Destiny http://www.amazon.com/dp/B00H9130XC IP Logged

T Mack 1 - FSO Serious Thumper Alliance Member Offline sold 2001 LS650 for a 1986 XLH1100 Posts: 2919 Emmaus,Pa Gender:	Re: trouble with idle Reply #4 - 07/16/08 at 19:19:50 oksavage wrote on 07/16/08 at 17:51:18: so does the pilot jet size determine the amount of fuel at 0 throttle Pliot jet affect 0 to 1/4 throttle. Needle (adj by white spacer) is 1/4 to 3/4 Main jet is 3/4 to WOT.
Back to top	Engineers design things, Technicians make them work. --- 30% of being mechanical is confidence/30% is knowing to go slow when needed/30% is looking repeatedly at what you have/10% is dumb luck IP Logged

oksavage Junior Member Offline Posts: 91 Gender:	Re: trouble with idle Reply #5 - 07/16/08 at 19:43:40 to do the spacer mod am I just looking for a thinner washer of the same diameter? Also, anybody know about throttle cables stretching??
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: trouble with idle Reply #6 - 07/16/08 at 19:59:29 Get a couple of #4 washers from the hardware store, either metal or nylon.
Back to top	Versey's Place Tech Section Index IP Logged

oksavage Junior Member Offline Posts: 91 Gender:	Re: trouble with idle Reply #7 - 07/16/08 at 20:04:54 thanks a bunch
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home