SuzukiSavage.com - Where is the thread about re-jetting??

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Where is the thread about re-jetting??

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Where is the thread about re-jetting?? (Read 68 times)

wsladaritz YaBB Newbies Offline My other ride is a Yaris ;) Posts: 8 Texas Gender:	Where is the thread about re-jetting?? 07/11/08 at 18:04:31 I've done searches and read alot of posts about rejetting the carb. They all say pretty much the same thing. You need to rejet if you modify the exhaust, just search the forum and you can find a thread that tells how to do it. I can't find it Can anyone give me a link to the thread that tells how to do a re-jet??
Back to top	IP Logged

ALfromN.H. FSO Serious Thumper Alliance Member Offline Dragon Slayer Posts: 1421 Rochester, New Hampshire Gender:	Re: Where is the thread about re-jetting?? Reply #1 - 07/11/08 at 18:09:34 This might help. http://suzukisavage.com/cgi-bin/YaBB.pl?board=RubberSideDown;action=display;n...
Back to top	2006 Harley Electra Glide 2014-Present 2009 Suzuki C50 2010-2014 2005 Suzuki S40 2006-2013 IP Logged

wsladaritz YaBB Newbies Offline My other ride is a Yaris ;) Posts: 8 Texas Gender:	Re: Where is the thread about re-jetting?? Reply #2 - 07/14/08 at 10:00:20 So does re-jetting just mean changing those two needles?? I've got those ordered already, will be getting to change those next week sometime. But do I just need to replace those to two needles and re-jetting is done?
Back to top	IP Logged

Serowbot

YaBB Moderator
ModSquad

Offline

OK.... so what's the
speed of dark?

Posts: 28651
Tucson Az
Gender: male

Re: Where is the thread about re-jetting??
Reply #3 - 07/14/08 at 10:48:23

The needle is not a jet. Jets are small brass restricting orifices that screw into fuel passages upward from the float bowl. The needle is attached to a slide that runs up and down from the top of the carb and varies fuel restriction based on engine vacuum. The more the engine vacuum pulls the needle down, the less fuel can flow between the needle and the passage.
Hope that helps.

Ludicrous Speed !... ... Huh

...

IP Logged

wsladaritz YaBB Newbies Offline My other ride is a Yaris ;) Posts: 8 Texas Gender:	Re: Where is the thread about re-jetting?? Reply #4 - 07/15/08 at 20:30:37 it does somewhat... i'll read over ur post again when I get home and the carb apart so I can see what I'm lookin at and what your talking about. I can't really picture it in my head But, thx for the info.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home