justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
My rear pulley was sloppy, so I cut shims from the recently deceased tube, taped them in place, havent ridden yet so no report. To align the pulleys, I have pulled the front pulley guard, just 8 mm socket, 3 bolts, & used a string, run into the front pulley by setting it on the cogs & rolling the bike , then pulling it back to the rear pulley & sighting down it. The rear pulley gets pulled somewhat wonky on acceleration, so perfect alignment is kinda hard to get, but you can get the wheel, if thats the goal, then some looking for a way to use a string may help you. Ive heard that sometimes the marks on the swingarm arent exactly even & the marks on the tensioners arent either, the little chrome dudes, 12 mm. wrench.
|