dills84 wrote on 07/01/08 at 10:03:01:4carbcorvair wrote on 07/01/08 at 09:59:23:but the turn signal is only on the rail... not in the fender? so having it move wouldnt change anything.
also, the helmet lock is on the rail and not the fender.
just as long as the mounting bolts to the fender are the same... should be ok.
Part of the turn signal or some sort of stud goes directly through the fender. It is very obviously felt on the inside. If this is the case, another hole would have to be drilled for the stud to go through.
Yes, I was using the helmet lock as reference to compare the two rails. The front bolt holes and helmet lock line up perfectly.
By looking at my bike, a new hole will have to be drilled if I want to install these.