4carbcorvair wrote on 07/01/08 at 06:04:28:SimonTuffGuy wrote on 06/30/08 at 08:32:31:I agree with Dills, pretty sure there were no changes between the years, even with the name change in 05...
I'll see in about 2 days I guess.
I bought a set of used rails recently and they are about an inch too long. The front two mounting holes line up. The hole for the turn signal and the over-all length is off by a good inch. I don't feel like drilling holes in my new 07 S40.
You're right. This pic shows the differences. The turn signal mount is much closer to the helmet lock on the S40.
There isn't a hole through the fender directly behind the turn signal on the savage. The red star shows the location of the hole that is there, where a bolt goes through the fender into the the sissy bar "leg".
The white star shows where the other hole in the Savage fender is, where the rail is bolted on. Not sure if that lines up with the S40 rail hole.
Hope that makes sense