SuzukiSavage.com - oil change

Keith55 Junior Member Offline SuzukiSavage.com Rocks! Posts: 57	oil change 06/20/08 at 06:48:17 Hello all. can anyone tell me how much oil to put back in after a oil and filter change? I just got this bike and don't have a manual for it. again the clymer manual that I do have is not very clear on this. Thanks Keith
Back to top	IP Logged

bill67 Serious Thumper Offline old tired Posts: 8517 genoa city wisconsin Gender:	Re: oil change Reply #1 - 06/20/08 at 06:51:52 2 quarts worked right for me after change with new filter.
Back to top	william h krumpen IP Logged

Keith55 Junior Member Offline SuzukiSavage.com Rocks! Posts: 57	Re: oil change Reply #2 - 06/20/08 at 06:56:56 Thanks
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: oil change Reply #3 - 06/20/08 at 07:13:52 The manual calls for 2.1 quarts. Thats 2 quarts, plus 3.2 ounces. I just toss in 2 & ride, top off later.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

T Mack 1 - FSO Serious Thumper Alliance Member Offline sold 2001 LS650 for a 1986 XLH1100 Posts: 2919 Emmaus,Pa Gender:	Re: oil change Reply #4 - 06/20/08 at 08:00:26 First time I did the oil change I bought 3 liters of MC oil. Only used a tiny bit of the 3rd ltr. Now only have to buy 2 ltrs and use the open bottle first. The last bottle has left over. I guess there will be a time where I'll need to buy a 3rd bottle but that will be a while.
Back to top	Engineers design things, Technicians make them work. --- 30% of being mechanical is confidence/30% is knowing to go slow when needed/30% is looking repeatedly at what you have/10% is dumb luck IP Logged

newrider55 YaBB Newbies Offline New rider and loving it. Posts: 45 Climax, MI Gender:	Re: oil change Reply #5 - 06/20/08 at 08:07:46 The Manual in the tech section says 1.9 US Qt for oil change without filter and 2.5 US Qt with filter change. Are we looking at the same manual? Tony
Back to top	'97 Black LS650 Supertrapp, Mod Carb '02 Silver LS650 Stock IP Logged

4carbcorvair Full Member Offline SuzukiSavage.com Rocks! Posts: 175 Maine Gender:	Re: oil change Reply #6 - 06/20/08 at 08:09:30 My owners manual says 1.9 quarts without filter, 2.1 with filter change.
Back to top	07 S40 IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: oil change Reply #7 - 06/20/08 at 08:59:00 drain/change the filter/pour in 2qts/run it to check for any leaks/let it set a couple minutes/get it vertical/check the sight glass - need the oil close to the upper mark/done
Back to top	IP Logged

mo.goad

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 20

Re: oil change
Reply #8 - 06/20/08 at 09:30:25

My manual says 1.9 Qt. without Oil Filter change and 2.1 with Filter change but, I bought a used '06 S40 from a dealer and the manual they gave me says "LS650". So I put 2 Qts in with Oil Filter change then run it for a few minutes and let rest for 3 more for oil to rest to bottom as the manual says then to check level, of course you have to level the bike up to see the level. It registered OK but then after a couple days of riding I re-checked it after running it and waiting the 3 min. allotment time to find that I had way too much. Oil totally filled the glass eye!! So I drain the excess and then some as I couldnt get the plug back in time without draining a lot more than needed. My advice is to put 1 Qt. in and a little bit of the 2nd till you get to the "Low" mark of the Glass Eye. Run for a few mins. then let rest for 3 mins. then check ( dont forget to upright the bike which can be a prob for someone who cant do both at same time ) Oil level. If still not somewhat close to the "High" mark on the glass eye, add just a little bit at a time till close or at the mark. And what I mean by a little bit at a time , thats exactly what I mean as the difference between Low and High is I think 0.3 Qt. Hope this helps

Back to top

IP Logged

T Mack 1 - FSO

Serious Thumper
Alliance Member

Offline

sold 2001 LS650 for
a 1986 XLH1100

Posts: 2919
Emmaus,Pa
Gender: male

Re: oil change
Reply #9 - 06/20/08 at 09:48:04

Acrtaully I don't go to the detail of measuring.

I add the open bottle, then a new bottle, then some of the second new bottle and see where I'm at. Then add tiny bits till I get to the line. Start it and run for little a bit, maybe a minute & shut it down. Wait few minutes (have a beer) then check again and top-off as needed.

I say bottle because the MC oil's I have seen are liter bottles which almost same as a quart but not quite. Little more I think. The manual also give liters.....

Back to top

Engineers design things, Technicians make them work.
---
30% of being mechanical is confidence/30% is knowing to go slow when needed/30% is looking repeatedly at what you have/10% is dumb luck Wink

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28906 L.A. California Gender:	Re: oil change Reply #10 - 06/20/08 at 10:07:08 Same here, except my bottle is a gallon jug. And all the bottle/jugs now a days have a clear strip and graduations. Might be as accurate as a shotgun, but it gets the job done.
Back to top	Versey's Place Tech Section Index IP Logged

Digger Serious Thumper 2005 No Login Offline Ya gotta be tough to ride singles! Posts: 1604 Colorado Springs, CO Gender:	Re: oil change Reply #11 - 08/02/08 at 21:18:12 I've yet to find a service manual in over 35 years of wrenchin' that gives an accurate amount of oil needed after a change. My Savage (see my signature) takes exactly 2 quarts to put the oil level midway between the marks on the window. FWIW.
Back to top	Digger 2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles I don't own a cage. www.astronautbiker.com IP Logged

Jay Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1445 Fort Worth, Texas Gender:	Re: oil change Reply #12 - 08/03/08 at 18:05:27 When I first got mine, I measured and made sure it was exact. Then I just started putting in 2 qts. at each change. The results were the same. I do change the filter with each oil change. Otherwise, to me, it's like pouring fresh beer in someone else's dirty beer mug. Yuck.
Back to top	You're invisible and naked. Ride safe, Jay IP Logged